512Mb, Multiple I/O Serial Flash Memory
Revision History
Revision History
Rev. O – 05/13
• Changed ICC1 (grade 3) to ICC1 (automotive) in the DC Current Characteristics and
Operating Conditions table, and added a footnote
• Revised maximum temperature (–40°C to 125°C) in DC Characteristics and Operating
Conditions table footnote
• Added part number N25Q512A83GSF40x and N25Q512A83G1240x in AC Characteris-
tics and Operating Conditions table note
Rev. N – 02/13
• Updated the READ ID Operation figure in READ ID Operations
• Updated ERASE Operations
• Added link to part number chart in Part Number Ordering Information
• Updated part numbers in Features
Rev. M – 12/12
Rev. L – 11/12
• Revised part numbers to selected notes in the Command Definitions table.
• Typo fix in Command Set table in Command Definitions – Dual I/O FAST READ - DTR
from DBh to BDh
Rev. K – 11/12
Rev. J – 08/12
• Updated part numbers
• Additional command (BULK ERASE) added to Command Set table in Command Defi-
nitions
• Corrections to Commands in Command Definitions
Rev. I – 07/12
• Added part number N25Q512A13GSFA0X to Features
• Added ICC1 (grade 3) to DC Characteristics and Operating Conditions
Rev. H – 06/12
Rev. G – 06/12
• Added part numbers N25Q512A83GSF40X and N25Q512A83G1240X and associated
QUAD commands for these part numbers.
• Typo fix in Supported Clock Frequencies - DTR table in Nonvolatile and Volatile Reg-
isters
• Updated tSSE specification in AC Reset Conditions table
PDF: 09005aef84752721
n25q_512mb_1ce_3V_65nm.pdf - Rev. O 05/13 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
90
© 2011 Micron Technology, Inc. All rights reserved.
MICRON [ MICRON TECHNOLOGY ]
