欢迎访问ic37.com |
会员登录 免费注册
发布采购

N25Q512A83GSF40G 参数 Datasheet PDF下载

N25Q512A83GSF40G图片预览
型号: N25Q512A83GSF40G
PDF下载: 下载PDF文件 查看货源
内容描述: 美光的串行NOR闪存3V ,多个I / O, 4KB扇区擦除N25Q512A [Micron Serial NOR Flash Memory 3V, Multiple I/O, 4KB Sector Erase N25Q512A]
分类和应用: 闪存
文件页数/大小: 91 页 / 1214 K
品牌: MICRON [ MICRON TECHNOLOGY ]
 浏览型号N25Q512A83GSF40G的Datasheet PDF文件第3页浏览型号N25Q512A83GSF40G的Datasheet PDF文件第4页浏览型号N25Q512A83GSF40G的Datasheet PDF文件第5页浏览型号N25Q512A83GSF40G的Datasheet PDF文件第6页浏览型号N25Q512A83GSF40G的Datasheet PDF文件第8页浏览型号N25Q512A83GSF40G的Datasheet PDF文件第9页浏览型号N25Q512A83GSF40G的Datasheet PDF文件第10页浏览型号N25Q512A83GSF40G的Datasheet PDF文件第11页  
512Mb, Multiple I/O Serial Flash Memory  
Device Description  
XIP Mode  
XIP mode requires only an address (no instruction) to output data, improving random  
access time and eliminating the need to shadow code onto RAM for fast execution.  
Nonvolatile configuration register bits can set XIP mode as the default mode for appli-  
cations that must enter XIP mode immediately after powering up.  
All protocols support XIP operation. For flexibility, multiple XIP entry and exit methods  
are available. For applications that must enter XIP mode immediately after power-up,  
nonvolatile configuration register bit settings can enable XIP as the default mode.  
Device Configurability  
The N25Q family offers additional features that are configured through the nonvolatile  
configuration register for default and/or nonvolatile settings. Volatile settings can be  
configured through the volatile and volatile-enhanced configuration registers. These  
configurable features include the following:  
• Number of dummy cycles for the fast READ commands  
• Output buffer impedance  
• SPI protocol types (extended SPI, dual SPI, or quad SPI)  
• Required XIP mode  
• Enabling/disabling HOLD (RESET function)  
• Enabling/disabling wrap mode  
Figure 1: Logic Diagram  
VCC  
DQ0  
DQ1  
C
NOR die 2  
NOR die 1  
S#  
VPP/W#/DQ2  
HOLD#/DQ3  
RESET  
VSS  
1. Reset functionality is available in devices with a dedicated part number. See Part Num-  
ber Ordering Information for more details. The RESET pin is available only for part num-  
bers N25Q512A83G1240X and N25Q512A83GSF40X. On these two parts, the additional  
RESET pin must be connected to an external pull-up.  
Note:  
PDF: 09005aef84752721  
n25q_512mb_1ce_3V_65nm.pdf - Rev. O 05/13 EN  
Micron Technology, Inc. reserves the right to change products or specifications without notice.  
7
© 2011 Micron Technology, Inc. All rights reserved.