256Mb, 3V Multiple I/O Serial Flash Memory
DC Characteristics and Operating Conditions
DC Characteristics and Operating Conditions
Table 46: DC Current Characteristics and Operating Conditions
Notes 1–5 apply to entire table
Parameter
Symbol
ILI
Test Conditions
Typ
–
Max
±2
Unit
µA
µA
µA
µA
µA
µA
µA
µA
mA
Input leakage current
Output leakage current
ILO
–
±2
Standby current (IT range)
Standby current (AT range)
Standby current (UT range)
Deep power-down current (IT range)
Deep power-down current (AT range)
Deep power-down current (UT range)
ICC1
ICC1
ICC1
ICC2
ICC2
ICC2
ICC3
S# = VCC, VIN = VSS or VCC
S# = VCC, VIN = VSS or VCC
S# = VCC, VIN = VSS or VCC
S# = VCC, VIN = VSS or VCC
S# = VCC, VIN = VSS or VCC
S# = VCC, VIN = VSS or VCC
30
30
30
5
75
120
180
35
5
80
5
120
16
Operating current
(fast-read extended I/O)
C = 0.1VCC/0.9VCC at 133 MHz, DQ1
= open
–
C = 0.1VCC/0.9VCC at 54 MHz, DQ1
= open
–
–
–
–
–
–
–
–
10
20
22
28
31
35
35
35
mA
mA
mA
mA
mA
mA
mA
mA
Operating current (fast-read dual I/O)
Operating current (fast-read quad I/O)
C = 0.1VCC/0.9VCC at 133 MHz DQ =
open
C = 0.1VCC/0.9VCC at 133 MHz DQ =
open
C = 0.1VCC / 0.9VCC at 80 MHz DTR
DQ = open
C = 0.1VCC / 0.9VCC at 90 MHz DTR
DQ = open
Operating current
(PROGRAM operations)
ICC4
ICC5
ICC6
S# = VCC
S# = VCC
S# = VCC
Operating current
(WRITE operations)
Operating current (ERASE operations)
1. All currents are RMS unless noted. Typical values at typical VCC (3.0/1.8V); VIO = 0V/VCC
;
Notes:
TC = +25°C.
2. Standby current is the average current measured over any time interval 5µs after S de-
assertion (and any internal operations are complete).
3. Deep power-down current is the average current measured 5ms over any 5ms time in-
terval, 100µs after the ENTER DEEP POWER-DOWN operation (and any internal opera-
tions are complete).
4. All read currents are the average current measured over any 1KB continuous read. No
load, checker-board pattern.
5. All program currents are the average current measured over any 256-byte typical data
program.
CCMTD-1725822587-3368
mt25q-qljs-L256-ABA-xxT.pdf - Rev. K 07/18 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
87
© 2014 Micron Technology, Inc. All rights reserved.
MICRON [ MICRON TECHNOLOGY ]
