256Mb: 3V Embedded Parallel NOR Flash
Write AC Characteristics
Figure 38: CE#-Controlled Program AC Timing (16-Bit Mode)
3rd Cycle 4th Cycle
Data Polling
PA
tWC
A[MAX:0]
WE#
555h
tAS
PA
tAH
tWH
tWS
tGHEL
OE#
CE#
tCP
tDS
tCPH
tWHWH1
DQ7# DOUT
DQ[14:0]/A-1
AOh
tDH
PD
1. Only the third and fourth cycles of the PROGRAM command are represented. The PRO-
GRAM command is followed by checking of the status register data polling bit.
Notes:
2. PA is the address of the memory location to be programmed. PD is the data to be pro-
grammed.
3. DQ7 is the complement of the data bit being programmed to DQ7 (See Data Polling Bit
[DQ7]).
4. See the following tables for timing details: Read AC Characteristics, WE#-Controlled
Write AC Characteristics, and CE#-Controlled Write AC Characteristics.
PDF: 09005aef84bd3b68
m29w_256mb.pdf - Rev. B 5/13 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
81
© 2013 Micron Technology, Inc. All rights reserved.
MICRON [ MICRON TECHNOLOGY ]
