PIC18F2420/2520/4420/4520
MULLW
Multiply Literal with W
MULWF
Multiply W with f
Syntax:
MULLW
k
Syntax:
MULWF f {,a}
Operands:
Operation:
Status Affected:
Encoding:
Description:
0 ≤ k ≤ 255
Operands:
0 ≤ f ≤ 255
a ∈ [0,1]
(W) x k → PRODH:PRODL
Operation:
(W) x (f) → PRODH:PRODL
None
Status Affected:
Encoding:
None
0000
1101
kkkk
kkkk
0000
001a
ffff
ffff
An unsigned multiplication is carried
out between the contents of W and the
8-bit literal ‘k’. The 16-bit result is
placed in the PRODH:PRODL register
pair. PRODH contains the high byte.
W is unchanged.
None of the Status flags are affected.
Note that neither Overflow nor Carry is
possible in this operation. A zero result
is possible but not detected.
Description:
An unsigned multiplication is carried
out between the contents of W and the
register file location ‘f’. The 16-bit
result is stored in the PRODH:PRODL
register pair. PRODH contains the
high byte. Both W and ‘f’ are
unchanged.
None of the Status flags are affected.
Note that neither Overflow nor Carry is
possible in this operation. A zero
result is possible but not detected.
If ‘a’ is ‘0’, the Access Bank is
selected. If ‘a’ is ‘1’, the BSR is used
to select the GPR bank (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction
operates in Indexed Literal Offset
Addressing mode whenever
Words:
Cycles:
1
1
Q Cycle Activity:
Q1
Q2
Q3
Q4
Decode
Read
literal ‘k’
Process
Data
Write
registers
PRODH:
PRODL
f ≤ 95 (5Fh). See Section 24.2.3
“Byte-Oriented and Bit-Oriented
Instructions in Indexed Literal Offset
Mode” for details.
Example:
MULLW
0C4h
Before Instruction
Words:
Cycles:
1
1
W
PRODH
PRODL
=
=
=
E2h
?
?
Q Cycle Activity:
Q1
After Instruction
Q2
Q3
Q4
W
PRODH
PRODL
=
=
=
E2h
ADh
08h
Decode
Read
register ‘f’
Process
Data
Write
registers
PRODH:
PRODL
Example:
MULWF
REG, 1
Before Instruction
W
REG
PRODH
PRODL
=
C4h
B5h
?
?
=
=
=
After Instruction
W
=
C4h
REG
PRODH
PRODL
=
=
=
B5h
8Ah
94h
DS39631E-page 294
© 2008 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
