PIC18F2420/2520/4420/4520
26.3 DC Characteristics: PIC18F2420/2520/4420/4520 (Industrial)
PIC18LF2420/2520/4420/4520 (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
DC CHARACTERISTICS
Param
Symbol
No.
Characteristic
Min
Max
Units
Conditions
VOL
VOH
Output Low Voltage
I/O Ports
D080
D083
—
—
0.6
0.6
V
V
IOL = 8.5 mA, VDD = 4.5V,
-40°C to +85°C
OSC2/CLKO
(RC, RCIO, EC, ECIO modes)
Output High Voltage(3)
IOL = 1.6 mA, VDD = 4.5V,
-40°C to +85°C
D090
D092
I/O Ports
VDD – 0.7
VDD – 0.7
—
—
V
V
IOH = -3.0 mA, VDD = 4.5V,
-40°C to +85°C
OSC2/CLKO
IOH = -1.3 mA, VDD = 4.5V,
(RC, RCIO, EC, ECIO modes)
-40°C to +85°C
Capacitive Loading Specs
on Output Pins
D100
COSC2 OSC2 pin
—
15
pF In XT, HS and LP modes
when external clock is
used to drive OSC1
D101
D102
CIO
CB
All I/O pins and OSC2
(in RC mode)
—
—
50
pF To meet the AC Timing
Specifications
pF I2C™ Specification
SCL, SDA
400
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PIC® device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
DS39631E-page 336
© 2008 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
