PIC18FXX20
REGISTER 17-5: SSPCON2: MSSP CONTROL REGISTER 2 (I2C MODE)
R/W-0
GCEN
R/W-0
ACKSTAT
R/W-0
ACKDT
R/W-0
ACKEN
R/W-0
RCEN
R/W-0
PEN
R/W-0
RSEN
R/W-0
SEN
bit 7
bit 0
bit 7
bit 6
bit 5
GCEN: General Call Enable bit (Slave mode only)
1= Enable interrupt when a general call address (0000h) is received in the SSPSR
0= General call address disabled
ACKSTAT: Acknowledge Status bit (Master Transmit mode only)
1= Acknowledge was not received from slave
0= Acknowledge was received from slave
ACKDT: Acknowledge Data bit (Master Receive mode only)
1= Not Acknowledge
0= Acknowledge
Note:
Value that will be transmitted when the user initiates an Acknowledge sequence at
the end of a receive.
bit 4
ACKEN: Acknowledge Sequence Enable bit (Master Receive mode only)
1= Initiate Acknowledge sequence on SDA and SCL pins, and transmit ACKDT data bit.
Automatically cleared by hardware.
0= Acknowledge sequence IDLE
bit 3
bit 2
RCEN: Receive Enable bit (Master Mode only)
1= Enables Receive mode for I2C
0= Receive IDLE
PEN: STOP Condition Enable bit (Master mode only)
1= Initiate STOP condition on SDA and SCL pins. Automatically cleared by hardware.
0= STOP condition IDLE
bit 1
bit 0
RSEN: Repeated START Condition Enabled bit (Master mode only)
1= Initiate Repeated START condition on SDA and SCL pins.
Automatically cleared by hardware.
0= Repeated START condition IDLE
SEN: START Condition Enabled/Stretch Enabled bit
In Master mode:
1= Initiate START condition on SDA and SCL pins. Automatically cleared by hardware.
0= START condition IDLE
In Slave mode:
1= Clock stretching is enabled for both Slave Transmit and Slave Receive (stretch enabled)
0= Clock stretching is disabled
Note: For bits ACKEN, RCEN, PEN, RSEN, SEN: If the I2C module is not in the IDLE
mode, this bit may not be set (no spooling) and the SSPBUF may not be written (or
writes to the SSPBUF are disabled).
Legend:
R = Readable bit
- n = Value at POR reset
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
2003 Microchip Technology Inc.
Advance Information
DS39609A-page 169
MICROCHIP [ MICROCHIP ]
