PIC16F882/883/884/886/887
8.1
Comparator Overview
8.0
COMPARATOR MODULE
A single comparator is shown in Figure 8-1 along with
the relationship between the analog input levels and
the digital output. When the analog voltage at VIN+ is
less than the analog voltage at VIN-, the output of the
comparator is a digital low level. When the analog
voltage at VIN+ is greater than the analog voltage at
VIN-, the output of the comparator is a digital high level.
Comparators are used to interface analog circuits to a
digital circuit by comparing two analog voltages and
providing a digital indication of their relative magnitudes.
The comparators are very useful mixed signal building
blocks because they provide analog functionality
independent of the program execution. The analog
Comparator module includes the following features:
• Independent comparator control
• Programmable input selection
• Comparator output is available internally/externally
• Programmable output polarity
• Interrupt-on-change
FIGURE 8-1:
SINGLE COMPARATOR
VIN+
VIN-
+
Output
–
• Wake-up from Sleep
• PWM shutdown
• Timer1 gate (count enable)
• Output synchronization to Timer1 clock input
• SR Latch
VIN-
VIN+
• Programmable and fixed voltage reference
Note:
Only Comparator C2 can be linked to
Timer1.
Output
Note:
The black areas of the output of the
comparator represents the uncertainty
due to input offsets and response time.
© 2007 Microchip Technology Inc.
Preliminary
DS41291D-page 83
MICROCHIP [ MICROCHIP ]
