PIC16F631/677/685/687/689/690
REGISTER 12-3: BAUDCTL: BAUD RATE CONTROL REGISTER
R-0
R-1
U-0
—
R/W-0
SCKP
R/W-0
U-0
—
R/W-0
WUE
R/W-0
ABDOVF
RCIDL
BRG16
ABDEN
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
bit 7
bit 6
ABDOVF: Auto-Baud Detect Overflow bit
Asynchronous mode:
1= Auto-baud timer overflowed
0= Auto-baud timer did not overflow
Synchronous mode:
Don’t care
RCIDL: Receive Idle Flag bit
Asynchronous mode:
1= Receiver is Idle
0= Start bit has been received and the receiver is receiving
Synchronous mode:
Don’t care
bit 5
bit 4
Unimplemented: Read as ‘0’
SCKP: Synchronous Clock Polarity Select bit
Asynchronous mode:
1= Transmit inverted data to the RB7/TX/CK pin
0= Transmit non-inverted data to the RB7/TX/CK pin
Synchronous mode:
1= Data is clocked on rising edge of the clock
0= Data is clocked on falling edge of the clock
bit 3
BRG16: 16-bit Baud Rate Generator bit
1= 16-bit Baud Rate Generator is used
0= 8-bit Baud Rate Generator is used
bit 2
bit 1
Unimplemented: Read as ‘0’
WUE: Wake-up Enable bit
Asynchronous mode:
1= Receiver is waiting for a falling edge. No character will be received byte RCIF will be set. WUE will
automatically clear after RCIF is set.
0= Receiver is operating normally
Synchronous mode:
Don’t care
bit 0
ABDEN: Auto-Baud Detect Enable bit
Asynchronous mode:
1= Auto-Baud Detect mode is enabled (clears when auto-baud is complete)
0= Auto-Baud Detect mode is disabled
Synchronous mode:
Don’t care
DS41262D-page 160
© 2007 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
