欢迎访问ic37.com |
会员登录 免费注册
发布采购

PIC16F628-04/SS 参数 Datasheet PDF下载

PIC16F628-04/SS图片预览
型号: PIC16F628-04/SS
PDF下载: 下载PDF文件 查看货源
内容描述: 基于闪存的8位CMOS微控制器 [FLASH-Based 8-Bit CMOS Microcontrollers]
分类和应用: 闪存微控制器
文件页数/大小: 160 页 / 1657 K
品牌: MICROCHIP [ MICROCHIP ]
 浏览型号PIC16F628-04/SS的Datasheet PDF文件第87页浏览型号PIC16F628-04/SS的Datasheet PDF文件第88页浏览型号PIC16F628-04/SS的Datasheet PDF文件第89页浏览型号PIC16F628-04/SS的Datasheet PDF文件第90页浏览型号PIC16F628-04/SS的Datasheet PDF文件第92页浏览型号PIC16F628-04/SS的Datasheet PDF文件第93页浏览型号PIC16F628-04/SS的Datasheet PDF文件第94页浏览型号PIC16F628-04/SS的Datasheet PDF文件第95页  
PIC16F62X  
The EEPROM data memory allows byte read and write.  
A byte write automatically erases the location and  
writes the new data (erase before write). The EEPROM  
data memory is rated for high erase/write cycles. The  
write time is controlled by an on-chip timer. The write-  
time will vary with voltage and temperature as well as  
from chip to chip. Please refer to AC specifications for  
exact limits.  
13.0 DATA EEPROM MEMORY  
The EEPROM data memory is readable and writable  
during normal operation (full VDD range). This memory  
is not directly mapped in the register file space. Instead  
it is indirectly addressed through the Special Function  
Registers. There are four SFRs used to read and write  
this memory. These registers are:  
• EECON1  
When the device is code protected, the CPU may  
continue to read and write the data EEPROM memory.  
The device programmer can no longer access  
this memory.  
• EECON2 (Not a physically implemented register)  
• EEDATA  
• EEADR  
EEDATA holds the 8-bit data for read/write, and EEADR  
holds the address of the EEPROM location being  
accessed. PIC16F62X devices have 128 bytes of data  
EEPROM with an address range from 0h to 7Fh.  
Additional information on the Data EEPROM is avail-  
able in the PICmicro™ Mid-Range Reference Manual,  
(DS33023).  
REGISTER 13-1: EEADR REGISTER (ADDRESS 9Bh)  
U
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
EADR6 EADR5 EADR4 EADR3 EADR2 EADR1 EADR0  
bit0  
R = Readable bit  
W = Writable bit  
S = Settable bit  
bit7  
U = Unimplemented bit, read  
as ‘0’  
-n = Value at POR reset  
bit 7  
Unimplemented Address: Must be set to '0'  
bit 6:0 EEADR: Specifies one of 128 locations for EEPROM Read/Write Operation  
13.1  
EEADR  
The EEADR register can address up to a maximum of  
256 bytes of data EEPROM. Only the first 128 bytes of  
data EEPROM are implemented and only seven of the  
eight bits in the register (EEADR<6:0>) are required.  
The upper bit is address decoded. This means that  
this bit should always be ’0’ to ensure that the address  
is in the 128 byte memory space.  
1999 Microchip Technology Inc.  
Preliminary  
DS40300B-page 91  
 复制成功!