PIC16C71X
Applicable Devices 710 71 711 715
11.0 ELECTRICAL CHARACTERISTICS FOR PIC16C710 AND PIC16C711
Absolute Maximum Ratings †
Ambient temperature under bias.................................................................................................................-55 to +125˚C
Storage temperature .............................................................................................................................. -65˚C to +150˚C
Voltage on any pin with respect to VSS (except VDD, MCLR, and RA4)..........................................-0.3V to (VDD + 0.3V)
Voltage on VDD with respect to VSS ........................................................................................................... -0.3 to +7.5V
Voltage on MCLR with respect to VSS................................................................................................................0 to +14V
Voltage on RA4 with respect to Vss ...................................................................................................................0 to +14V
Total power dissipation (Note 1)................................................................................................................................1.0W
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin ..............................................................................................................................250 mA
Input clamp current, IIK (VI < 0 or VI > VDD).....................................................................................................................± 20 mA
Output clamp current, IOK (VO < 0 or VO > VDD).............................................................................................................± 20 mA
Maximum output current sunk by any I/O pin..........................................................................................................25 mA
Maximum output current sourced by any I/O pin ....................................................................................................25 mA
Maximum current sunk by PORTA ........................................................................................................................200 mA
Maximum current sourced by PORTA...................................................................................................................200 mA
Maximum current sunk by PORTB........................................................................................................................200 mA
Maximum current sourced by PORTB...................................................................................................................200 mA
Note 1: Power dissipation is calculated as follows: Pdis = VDD x {IDD - ∑ IOH} + ∑ {(VDD - VOH) x IOH} + ∑(VOl x IOL)
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device.This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
TABLE 11-1: CROSS REFERENCE OF DEVICE SPECS FOR OSCILLATOR CONFIGURATIONS
AND FREQUENCIES OF OPERATION (COMMERCIAL DEVICES)
PIC16C710-04
PIC16C711-04
PIC16C710-10
PIC16C711-10
PIC16C710-20
PIC16C711-20
PIC16LC710-04
PIC16LC711-04
PIC16C710/JW
PIC16C711/JW
OSC
VDD: 4.0V to 6.0V
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
VDD: 2.5V to 6.0V
VDD: 4.0V to 6.0V
IDD: 5 mA max. at 5.5V IDD: 2.7 mA typ. at 5.5V IDD: 2.7 mA typ. at 5.5V IDD: 3.8 mA typ. at 3.0V IDD: 5 mA max. at 5.5V
RC
IPD: 21 µA max. at 4V IPD: 1.5 µA typ. at 4V
IPD: 1.5 µA typ. at 4V
IPD: 5.0 µA typ. at 3V
IPD: 21 µA max. at 4V
Freq:4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq:4 MHz max.
VDD: 4.0V to 6.0V
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
VDD: 2.5V to 6.0V
VDD: 4.0V to 6.0V
IDD: 5 mA max. at 5.5V IDD: 2.7 mA typ. at 5.5V IDD: 2.7 mA typ. at 5.5V IDD: 3.8 mA typ. at 3.0V IDD: 5 mA max. at 5.5V
XT
HS
IPD: 21 µA max. at 4V IPD: 1.5 µA typ. at 4V
IPD: 1.5 µA typ. at 4V
IPD: 5.0 µA typ. at 3V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
VDD:4.5V to 5.5V
VDD: 4.5V to 5.5V
IDD: 13.5 mA typ. at
5.5V
IDD: 30 mA max. at
5.5V
IDD: 30 mA max. at
5.5V
IDD: 30 mA max. at
5.5V
Not recommended for
use in HS mode
IPD: 1.5 µA typ. at 4.5V IPD: 1.5 µA typ. at 4.5V IPD: 1.5 µA typ. at 4.5V
IPD: 1.5 µA typ. at 4.5V
Freq: 4 MHz max.
Freq: 10 MHz max.
Freq:20 MHz max.
Freq: 10 MHz max.
VDD: 4.0V to 6.0V
IDD: 52.5 µA typ. at
32 kHz, 4.0V
IPD: 0.9 µA typ. at 4.0V
Freq: 200 kHz max.
VDD: 2.5V to 6.0V
IDD: 48 µA max. at
32 kHz, 3.0V
IPD: 5.0 µA max. at 3.0V IPD: 5.0 µA max. at
Freq: 200 kHz max.
VDD: 2.5V to 6.0V
IDD: 48 µA max. at
32 kHz, 3.0V
Not recommended for
use in LP mode
Not recommended for
use in LP mode
LP
3.0V
Freq: 200 kHz max.
1997 Microchip Technology Inc.
DS30272A-page 89
MICROCHIP [ MICROCHIP ]
