PIC10F200/202/204/206
TABLE 3-2:
Name
PIC10F200/202/204/206 PINOUT DESCRIPTION
Input Output
Function
Description
Type
Type
GP0/ICSPDAT/CIN+
GP1/ICSPCLK/CIN-
GP0
TTL
CMOS Bidirectional I/O pin. Can be software programmed for internal
weak pull-up and wake-up from Sleep on pin change.
CMOS In-Circuit Serial Programming™ data pin.
ICSPDAT
CIN+
ST
AN
—
Comparator input (PIC10F204/206 only).
GP1
TTL
CMOS Bidirectional I/O pin. Can be software programmed for internal
weak pull-up and wake-up from Sleep on pin change.
ICSPCLK
CIN-
ST
AN
TTL
ST
—
CMOS In-Circuit Serial Programming clock pin.
—
Comparator input (PIC10F204/206 only).
CMOS Bidirectional I/O pin.
Clock input to TMR0.
GP2/T0CKI/COUT/
FOSC4
GP2
T0CKI
COUT
FOSC4
GP3
—
CMOS Comparator output (PIC10F204/206 only).
CMOS Oscillator/4 output.
—
GP3/MCLR/VPP
TTL
—
Input pin. Can be software programmed for internal weak
pull-up and wake-up from Sleep on pin change.
MCLR
ST
—
Master Clear (Reset). When configured as MCLR, this pin is
an active-low Reset to the device. Voltage on GP3/MCLR/VPP
must not exceed VDD during normal device operation or the
device will enter Programming mode. Weak pull-up always on
if configured as MCLR.
VPP
VDD
VSS
HV
P
—
—
—
Programming voltage input.
VDD
VSS
Positive supply for logic and I/O pins.
Ground reference for logic and I/O pins.
P
Legend: I = Input, O = Output, I/O = Input/Output, P = Power, — = Not used, TTL = TTL input,
ST = Schmitt Trigger input, AN = Analog input
DS41239D-page 12
© 2007 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
