PIC10F200/202/204/206
TABLE 3-2:
Name
GP0/ICSPDAT/CIN+
PIC10F200/202/204/206 PINOUT DESCRIPTION
Function
GP0
ICSPDAT
CIN+
Input
Type
TTL
ST
AN
TTL
ST
AN
TTL
ST
—
—
TTL
ST
Output
Type
Description
CMOS Bidirectional I/O pin. Can be software programmed for internal
weak pull-up and wake-up from Sleep on pin change.
CMOS In-Circuit Serial Programming
™
data pin.
—
Comparator input (PIC10F204/206 only).
CMOS Bidirectional I/O pin. Can be software programmed for internal
weak pull-up and wake-up from Sleep on pin change.
CMOS In-Circuit Serial Programming clock pin.
—
—
Comparator input (PIC10F204/206 only).
Clock input to TMR0.
CMOS Bidirectional I/O pin.
CMOS Comparator output (PIC10F204/206 only).
CMOS Oscillator/4 output.
—
—
Input pin. Can be software programmed for internal weak
pull-up and wake-up from Sleep on pin change.
Master Clear (Reset). When configured as MCLR, this pin is
an active-low Reset to the device. Voltage on GP3/MCLR/V
PP
must not exceed V
DD
during normal device operation or the
device will enter Programming mode. Weak pull-up always on
if configured as MCLR.
Programming voltage input.
Positive supply for logic and I/O pins.
Ground reference for logic and I/O pins.
GP1/ICSPCLK/CIN-
GP1
ICSPCLK
CIN-
GP2/T0CKI/COUT/
FOSC4
GP2
T0CKI
COUT
FOSC4
GP3/MCLR/V
PP
GP3
MCLR
V
PP
V
DD
V
SS
V
DD
V
SS
HV
P
P
—
—
—
Legend:
I = Input, O = Output, I/O = Input/Output, P = Power, — = Not used, TTL = TTL input,
ST = Schmitt Trigger input, AN = Analog input
DS41239D-page 12
©
2007 Microchip Technology Inc.
MICROCHIP [ MICROCHIP TECHNOLOGY ]
