24AA512/24LC512/24FC512
7.0
ACKNOWLEDGE POLLING
FIGURE 7-1:
Since the device will not acknowledge during a write
cycle, this can be used to determine when the cycle is
complete (this feature can be used to maximize bus
throughput). Once the Stop condition for a Write
command has been issued from the master, the device
initiates the internally timed write cycle. ACK polling
can be initiated immediately. This involves the master
sending a Start condition, followed by the control byte
for a Write command (R/W =
0).
If the device is still
busy with the write cycle, then no ACK will be returned.
If no ACK is returned, then the Start bit and control byte
must be re-sent. If the cycle is complete, then the
device will return the ACK and the master can then
proceed with the next Read or Write command. See
ACKNOWLEDGE POLLING
FLOW
Send
Write Command
Send Stop
Condition to
Initiate Write Cycle
Send Start
Send Control Byte
with R/W =
0
Did Device
Acknowledge
(ACK =
0)?
Yes
Next
Operation
No
©
2005 Microchip Technology Inc.
DS21754G-page 11
MICROCHIP [ MICROCHIP TECHNOLOGY ]
