ML2280, ML2283
PHYSICAL DIMMENSIONS inches (millimeters)
Package: P14
14-Pin PDIP
0.740 - 0.760
(18.79 - 19.31)
14
0.240 - 0.260 0.295 - 0.325
(6.09 - 6.61) (7.49 - 8.25)
PIN 1 ID
1
0.070 MIN
(1.77 MIN)
(4 PLACES)
0.050 - 0.065 0.100 BSC
(1.27 - 1.65) (2.54 BSC)
0.015 MIN
(0.38 MIN)
0.170 MAX
(4.32 MAX)
SEATING PLANE
0.008 - 0.012
(0.20 - 0.31)
0.016 - 0.022
(0.40 - 0.56)
0º - 15º
0.125 MIN
(3.18 MIN)
ORDERING INFORMATION
ALTERNATE
TOTAL
TEMPERATURE
PART NUMBER
PART NUMBER
UNADJUSTEDERROR
RANGE
PACKAGE
SINGLE ANALOG INPUT, 8-PIN PACKAGE
ML2280BIP (Obs)
ML2280BIS (Obs)
ML2280BCP (Obs)
ML2280BCS (Obs)
ML2280CIP (Obs)
ML2280CIS (Obs)
ML2280CCP (Obs)
ML2280CCS (Obs)
–40°C to 85°C
–40°C to 85°C
0°C to 70°C
8-Pin DIP (P08)
8-Pin SOIC (S08)
8-Pin DIP (P08)
8-Pin SOIC (S08)
8-Pin DIP (P08)
8-Pin SOIC (S08)
8-Pin DIP (P08)
8-Pin SOIC (S08)
±1/2 LSB
±1 LSB
0°C to 70°C
–40°C to 85°C
–40°C to 85°CQ
0°C to 70°C
0°C to 70°C
TWO ANALOG INPUTS, 14-PIN PACKAGE
ML2283BIP (Obs)
ML2283BCP (Obs)
ML2283CIP (Obs)
ML2283CCP (EOL)
ADC0833CCN
–40°C to 85°C
0°C to 70°C
–40°C to 85°C
0°C to 70°C
14-Pin DIP (P014)
14-Pin DIP (P014)
14-Pin DIP (S014)
14-Pin DIP (P014)
±1/2 LSB
±1 LSB
ADC0833BCN
ADC0833BCN
ADC0833CCN
© Micro Linear 1997
is a registered trademark of Micro Linear Corporation
Products described in this document may be covered by one or more of the following patents, U.S.: 4,897,611; 4,964,026; 5,027,116; 5,281,862; 5,283,483; 5,418,502; 5,508,570; 5,510,727; 5,523,940;
5,546,017; 5,559,470; 5,565,761; 5,592,128; 5,594,376; Japan: 2598946; 2619299. Other patents are pending.
Micro Linear reserves the right to make changes to any product herein to improve reliability, function or design.
2092 Concourse Drive
Micro Linear does not assume any liability arising out of the application or use of any product described herein,
San Jose, CA 95131
Tel: 408/433-5200
Fax: 408/432-0295
neither does it convey any license under its patent right nor the rights of others. The circuits contained in this
data sheet are offered as possible applications only. Micro Linear makes no warranties or representations as to
whether the illustrated circuits infringe any intellectual property rights of others, and will accept no responsibility
or liability for use of any application herein. The customer is urged to consult with appropriate legal counsel
before deciding on a particular application.
DS2280_83-01
20
MICRO-LINEAR [ MICRO LINEAR CORPORATION ]
