Differential LVDS Crystal Clock Oscillators
3HDF5761 and 3HDF5762 Series +3.3V, “F” family
MERCURY
Since 1973
311.020 MHz
622.080 MHz
-59
-48
-86
-80
-116
-108
-129
-118
-124
-114
-140
-131
-148
-138
Period Jitter
(RMS)
Period Jitter
(peak-to-peak)
Integrated Jitter RMS
(12 KHz ~20 MHz)
77.760 MHz
155.520 MHz
311.020 MHz
622.080 MHz
2.5 ps typ; 4.0 ps max
3.0 ps typ; 5.0 ps max
3.0 ps typ; 5.0 ps max
6.0 ps typ; 8.0 ps max
18 ps typ.; 30 ps max
20 ps typ.; 30 ps max
25 ps typ.; 30 ps max
40 ps typ.; 50 ps max
0.4 ps typ; 0.5 ps max.
0.4 ps typ; 0.5 ps max.
0.4 ps typ; 0.5 ps max.
0.4 ps typ; 0.5 ps max.
Jitter
Start-up Time
Aging
5 m sec. max.
±3 ppm / year max.
Packaging
179 mm reel; 16 mm tape, 8.0 mm pitch. 1000 pcs per reel.
Contact Pad Surface Finish
Nickel over gold on ceramic substrate
(1)Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging at +25°C, shock and
vibration.
Absolute Maximum Rating Permanent damage may be created if operate beyond limits specified
Supply Voltage VDD
Input Voltage Vi
Input Voltage Vo
E S D Protection
+4.6 V D.C. max.
Vss-0.5V min.; VDD +0.5V max.
Vss-0.5V min.; VDD +0.5V max.
2 KV max. Human body model
Environmental Performance Specifications
Green Requirement
Moisture Sensitivity Level
Storage temp. range
Humidity
Hermetic seal
Solderability
RoHS Compliant and Pb (lead) free
Level 1
-55 to +125°C
85% RH, 85°C, 48 hours
Leak rate 2x10-8 ATM-cm3/sec max.
MIL-STD-202F method 208E
Vibration
Shock
MIL-STD-202F method 204, 35G, 50 to 2000 Hz
MIL-STD-202F method 213B, test condi. E, 1000GG ½ sine wave
Part Number Format and Example:
Example: 3HDF5761A-120N-155.520
Explanation: +3.3V HDF5761 series LVDS output clock oscillator, 155.520 MHz, frequency stability is ±25 ppm over
-10°C to +70°C, frequency deviation range is ±120 ppm minimum.
": customer to specify
"
A
p
"
120
q
"
N
r
"
155.520
s
3
HDF5761
—
—
n
o
n: Voltage codes: “3” for +3.3 V; o: HDF5761 product series. ‘H” for clock; “D” for LVDS; “F”: for “F” family
performance.“576” for 5x7 mm SMD with 6 pads; “1” for Tri-state on pad No. 1 p: Frequency stability code: “A” ~
“F” or custom. See table above. q: Frequency deviation range in ppm r Frequency deviation range code. “N” for
minimum; “M” for maximum; “T” for typical (±20%) s Frequency in MHz
3HDF5761Test Circuit and Waveform:
MERCURY
Page 2 of 4
Date: April 1, 2008
Rev. 1