MX29LV800C T/B
AUTOMATIC PROGRAMMING TIMING WAVEFORM
ing after automatic programming starts. Device outputs
DATA# during programming and DATA# after program-
ming on Q7. (Q6 is for toggle bit; see toggle bit, DATA#
polling, timing waveform)
One byte data is programmed. Verify in fast algorithm
and additional verification by external control are not re-
quired because these operations are executed automati-
cally by internal control circuit. Programming comple-
tion can be verified by DATA# polling and toggle bit check-
FIGURE 3.AUTOMATIC PROGRAMMINGTIMINGWAVEFORM
Program Command Sequence(last two cycle)
Read Status Data (last two cycle)
tWC
tAS
PA
PA
555h
PA
Address
CE#
tAH
tCH
tGHWL
OE#
WE#
tWHWH1
tWP
tCS
tWPH
tDS tDH
Status
A0h
PD
DOUT
Data
tBUSY
tRB
RY/BY#
tVCS
VCC
NOTES:
1.PA=Program Address, PD=Program Data, DOUT is the true data the program address
P/N:PM1183
REV. 1.4, APR. 24, 2006
30
Macronix [ MACRONIX INTERNATIONAL ]
