+5V to ±10V Voltage Converters
Paralleling Devices
Paralleling multiple MAX680/MAX681s reduces the out-
put resistance of both the positive and negative con-
verters. The effective output resistance is the output
resistance of a single device divided by the number of
devices. As Figure 4 shows, each MAX680 requires
separate pump capacitors C1 and C2, but all can
share a single set of reservoir capacitors.
no external setting resistors, minimizing part count. The
combined quiescent current of the MAX680/MAX681,
MAX663, and MAX664 is less than 500µA, while the out-
put current capability is 5mA. The MAX680/MAX681
input can vary from 3V to 6V without affecting regulation
appreciably. With higher input voltage, more current can
be drawn from the MAX680/MAX681 outputs. With 5V at
V
CC
, 10mA can be drawn from both regulated outputs
simultaneously. Assuming 150Ω source resistance for
both converters, with (I
L+
+ I
L-
) = 20mA, the positive
charge pump will droop 3V, providing +7V for the nega-
tive charge pump. The negative charge pump will droop
another 1.5V due to its 10mA load, leaving -5.5V at V-
sufficient to maintain regulation for the MAX664 at this
current.
MAX680/MAX681
±5V Regulated Supplies from
a Single 3V Battery
Figure 5 shows a complete ±5V power supply using one
3V battery. The MAX680/MAX681 provide +6V at V+,
which is regulated to +5V by the MAX666, and -6V,
which is regulated to -5V by the MAX664. The MAX666
and MAX664 are pretrimmed at wafer sort and require
LOW-BATTERY
WARNING AT 3.5V
LBO
LBI
2MΩ
100µF
V
CC
6V TO 3V
100µF
C1-
C2+
100µF
C2-
GND
100µF
V
IN
-12V TO -6V
V-
0.1µF
GND
SDN V
SET
10µF
GND
C1+
MAX680
V+
1.2MΩ
0.1µF
+12V TO +6V
VIN
GND
VOUT
SDN VSET
10µF
+5V
SENSE
MAX666
MAX664
VOUT1
VOUT2
SENSE
-5V
Figure 5. Regulated +5V and -5V from a Single Battery
_______________________________________________________________________________________
7
MAXIM [ MAXIM INTEGRATED PRODUCTS ]
