DS21354/DS21554 3.3V/5V E1 Single-Chip Transceivers
Signal Name:
RFSYNC
Signal Description:
Signal Type:
Receive Frame Sync
Output
An extracted 8kHz pulse, one RCLK wide, is output at this pin that identifies frame boundaries.
Signal Name:
RMSYNC
Signal Description:
Signal Type:
Receive Multiframe Sync
Output
If the receive-side elastic store is enabled, an extracted pulse, one RSYSCLK wide, is output at this pin
that identifies multiframe boundaries. If the receive-side elastic store is disabled, then this output will
output multiframe boundaries associated with RCLK.
Signal Name:
RDATA
Signal Description:
Signal Type:
Receive Data
Output
Updated on the rising edge of RCLK with the data out of the receive-side framer.
Signal Name:
RSYSCLK
Signal Description:
Signal Type:
Receive System Clock
Input
1.544MHz, 2.048MHz, 4.096MHz, or 8.192MHz clock. Only used when the receive-side elastic store
function is enabled. Should be tied low in applications that do not use the receive-side elastic store. See
Section 17 for details on 4.096MHz and 8.192MHz operation using the Interleave Bus Option.
Signal Name:
RSIG
Signal Description:
Signal Type:
Receive Signaling Output
Output
Outputs signaling bits in a PCM format. Updated on rising edges of RCLK when the receive-side elastic
store is disabled. Updated on the rising edges of RSYSCLK when the receive-side elastic store is enabled.
Signal Name:
RLOS/LOTC
Signal Description:
Signal Type:
Receive Loss of Sync / Loss of Transmit Clock
Output
A dual function output that is controlled by the TCR2.0 control bit. This pin can be programmed to either
toggle high when the synchronizer is searching for the frame and multiframe or to toggle high if the
TCLK pin has not been toggled for 5ꢀs.
Signal Name:
RCL
Signal Description:
Signal Type:
Receive Carrier Loss
Output
Set high when the line interface detects a carrier loss.
Signal Name:
RSIGF
Signal Description:
Signal Type:
Receive Signaling Freeze
Output
Set high when the signaling data is frozen via either automatic or manual intervention. Used to alert
downstream equipment of the condition.
18 of 124
MAXIM [ MAXIM INTEGRATED PRODUCTS ]
