Product Specification
7. MEASUREMENT METHOD AND PERFORMANCE
No.
7.1
ITEM
External
Appearance
MEASUREMENT METHOD
Visual and touch feeling inspection.
108-78140
PERFORMANCE
There shall be no detrimental crack,rust,play,
scratch,deformation and etc.
7.2
Feeling on
Mating
/Unmating
Insertion
Force
Feeling is verified by mating and unmating the contact,housing and There should be no detrimental binding.
connector
7.3
Pin contact or cap housing connector is fastened first,then Contact
receptacle contact or plug housing and plug connector are mated Housing
Connector
at a constant mating speed of approx.
100mm/min. or less toward the axis.
4.9N(0.5kgf) or less
58.8N(6kgf) or less
98N(10kgf) or less
7.4
Withdrawal
Force
Pin contact or cap housing connector is fastened first,then mated Contact
receptacle contact or plug housing and the connector is pulled at Housing
a constant speed of approx.
Connector
100mm/min. or less toward the axis. (Plug housing should be
installed without locking.)
4.9N(0.5kgf) or less
58.8N(6kgf) or less
98N(10kgf) or less
Rev. A8
5 of 41
MACOM [ Tyco Electronics ]
