Product Specification
No.
7.16
ITEM
Temperature
Rise Magnitude
108-78140
PERFORMANCE
MEASUREMENT METHOD
7.17
Intermittent
Discontinuity
“Temperature
Rise Test” of item No.8.16 is made and temperature of Temperature rise: 60℃ or less.
connector surface near the mated interface of the contact, is
measured when the temperature has saturated.
Power of 12V or less open voltage and 1A or less short circuit Intermittent discontinuity shall not last for 10
current is applied to the mated connector with the contacts in all μsec or more.
positions connected in series and then intermittent discontinuity
is monitored with an intermittent discontinuity detector.(Fig.5)
Fig. 5
Connector
Intermittent
Discontinuity
Checker
Rev. A8
11 of 41
MACOM [ Tyco Electronics ]
