General Purpose Relays
PCB Relays
SCHRACK
Power PCB Relay RT1 Inrush Power (Continued)
Terminal assignment
Bottom view on solder pins
monostable version
bistable version
a)
a) Indicated contact position during or after coil
energization with reset voltage.
b) for 2 coil version only
S0163-BF
S0163DPS
Dimensions / PCB layout
version without test tab
16A, pinning 5mm
b) for 2 coil version only
S0272-BW
S0272-BC
s0418-CV
version with test tab
*) With the recommended PCB hole
sizes a grid pattern from 2.5mm to
2.54mm can be used.
S0491-B
S0492-CU
3
04-2011, Rev. 0411
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
MACOM [ Tyco Electronics ]
