General Purpose Relays
PCB Relays
SCHRACK
Power PCB Relay RT1 Inrush Power
n
n
n
n
n
n
n
1 pole 16A, 1 form A (NO) contact (W pre-make contact + AgSnO2)
10A/250VAC making and breaking capacity acc. to IEC 60669-1
165A/20ms inrush peak current
Mono- or bistable coil
5kV/10mm coil-contact
Reinforced insulation
Test tab (manual operator) optional
Typical applications
Lighting systems, movement sensors, filament and incandescent lamp
loads, motors
F0272-B
V Z b
Approvals
VDE REG.-Nr. 6106,UL E214025, cCSAus 14385
Technical data of approved types on request
Contact Data (continued)
Mechanical endurance
DC coil
>5x106 ops.
>3x106 ops.
>1x103 ops.
>10x106 ops.
>5x106 ops.
-
Contact Data
RT.3T
RTS3L
bistable version
tab manually operated
Contact arrangement
Rated voltage
1 form A (NO) contact
250VAC
400VAC
16A
Max. switching voltage
Rated current
Coil Data, monostable DC coil
Coil voltage range
Operative range, IEC 61810
Limiting continuous current
Limiting making current,
max. 20ms (incand. lamps)
max. 200µs (flourescent lamps)
Breaking capacity max.
Contact material
16A, UL: 20A (RTS3L)
5 to 110VDC
2
165A
800A
120A
-
Coil insulation system according UL1446
class F
4000VA
Coil versions, monostable DC coil
W (pre-make cont.)
+AgSnO2
AgSnO2
Coil
code
Rated
voltage
VDC
5
6
12
24
48
60
110
Operate
voltage
VDC
3.5
4.2
8.4
16.8
33.6
42.0
77.0
Release
voltage
VDC
0.5
0.6
1.2
2.4
4.8
6.0
11.0
Coil
resistance
Ω 10ꢀ1)
62
Rated coil
power
mW
Contact style
pre-make contact single contact
Frequency of operation, with/without load
Operate/release time max., DC coil
Operate/Reset time max., bistable version
Bounce time max.
360/3600h-1
10/5ms
10/10ms
4ms
005
006
012
024
048
060
110
403
400
90
360
1440
400
400
5520
417
420
420
Contact ratings
85701)
288001)
Type
Contact
Load
20A, 250VAC resistive, 70°C
Cycles
1) Coil resistance 12ꢀ.
IEC 61810
RTS3L
A (NO)
20x103
100x103
5x103
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
RTS3L monostable A (NO) 16A, 250VAC resistive, 85°C
RTS3T
UL 508
RTS3L
RTS3L
RTS3L
RTS3L
RTS3T
A (NO)
16A, 250VAC resistive, 85°C
A (NO)
A (NO)
A (NO)
A (NO)
A (NO)
20A, 250VAC, general purpose, 70°C
16A, 250VAC, resistive, 85°C
TV8, 240VAC, 40°C
1.5hp, 240VAC, 70°C
1200W Tungsten, 120VAC/277VAC,
60Hz, 50°C
20x103
50x103
25x103
30x103
6x103
6x103
RTS3T
A (NO)
620W Discharge lamps (standard ballast),
120VAC/277VAC, 60Hz, 50°C
Coil Data, bistable coils
Magnetic system
Coil voltage range
Operative range, IEC 61810
Limiting voltage, ꢀ of rated coil voltage 120ꢀ
1 coil
2 coils
polarized, bistable
3 to 24VDC
2
150ꢀ
Min./Max. energization duration
Coil insulation system according UL1446
30ms/1min at <10ꢀ duty factor
class F
1
04-2011, Rev. 0411
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
MACOM [ Tyco Electronics ]
