NOTE: All part numbers
are RoHS Compliant
AMP M Series
Pin and Socket Connectors
Cable-to-Cable (Continued)
1. Confirm that Application A (at left) most closely meets
your requirements. (Other applications are shown on
pages 12 through 25.)
Special application housings may be substituted
for these standard housings. See Special Application
Section.
2. Find the appropriate column for the number of positions
required.
This cable-to-cable application utilizes locking springs, strain
relief clamps, a pin hood for pin protection and guide hard-
ware.
3. Select part numbers required for the application listed
in the column below the number of positions.
The 34 and 50 position connectors can be used with either
center or corner guide hardware. If center guide hardware is
used, an additional four 4-40 screws, nuts and lockwashers are
required to secure the locking springs. Corner guides require
four guide pins and four guide sockets for each mated pair of
connectors.
3. If a part number is not listed for a particular item, it is
not available.
3. If more than one part number is listed for a particular
hardware item, choose the one which best fits your
application.
4. Dimensional information is available on the indicated
pages under description column.
5. Select Contacts: Type II (page 30), Type III+ (pages 31
through 35) or Subminiature Coaxial (pages 40, 41).
Number of Positions
Component Description
160 CF
41
202135-2
201302-1
202135-4
201302-3
—
50
75
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
104
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
104 CF
201358-1
200277-2
201358-3
200277-4
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Plug Block
Receptacle Block
Phenolic
}
}
}
—
STANDARD
HOUSINGS
—
Plug Block
Receptacle Block
Diallyl Phthalate
Polyester
—
Pages 44 to 51
1-201692-6
Plug Block
Receptacle Block
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Long
Short
STRAIN
RELIEF
CLAMPS
Page 88
Nickel Plated Steel
}
}
—
201182-4
201847-1
—
201766-1
—
Long
Short
Stainless Steel
200389-2
200390-9
—
200389-2
200390-9
1-200833-1
1-200835-1
201925-1
Center Male
GUIDE
HARDWARE
Page 81
Center Female
Stainless Steel
Corner Male
}
—
Corner Female
201921-1
Male—Nickel Plated Spring Steel
1
LOCKING SPRINGS
Page 80
201922-1
201926-1
—
—
—
—
Female—Stainless Steel
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Internal Open End
Nickel Plated Steel
Internal Closed End Nickel Plated Steel
PIN HOODS
Pages 82 and 83
External Closed End Al Iridite
External Closed End Nickel Plated Steel
11
Catalog 82003
Revised 06-08
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Japan: 81-44-844-8013
UK: 44-141-810-8967
www.tycoelectronics.com
MACOM [ Tyco Electronics ]
