RAYCHEM Tubing Products
RBK-ILS-Processor MkII
Installation of Splice
Sealing Products Adjacent
to Ultrasonic Welder
2
Product Facts
I Increased heating
element life
I Installation times,
temperatures and product
size information (individual
selection)
I Sequenced installations
I Operator key lock/password
protection levels
I Automatic heater retraction
on mains failure
I Automatic calibration (single
cycle)
I RS232 interface allows
time, temperature and
product sizes for the next
installation to be transferred
from a remote machine (e.g.
an ultrasonic welding tool)
I Machine hours and
installation cycle counters
I Software upgradeable to
support special applications
I Air cooling can be provided
to an optional stub splice
fixture in the RBK-Proc-Mk2-
Proc-Aircool version
I Automatic communication The wire assembly is
Applications
with upstream ultrasonic
welder can allow time
and temperature to be
automatically set without
operator intervention.
automatically ejected, with
the splice sealing product
installed and the joint area
sealed, insulated and strain
relieved. In-line or stub-type
splices can be installed.
The RBK-ILS-Processor
MkII is a semi-automatic
unit designed specifically
to install splice sealing
products onto ultrasonically
welded or crimped splice
joints used in automotive
harnesses.
The operator is able to
efficiently load both
machines and so minimize
‘dead time’. Installing
The tool can operate in
several modes:
Raychem splice sealing
products immediately after
welding gives reduced
installation time and earliest
possible mechanical pro-
tection for the welded joint.
The operator positions the
splice sealing product cen-
trally over the splice joint
and then locates the
I Stand-alone — operator
sets time and temperature.
I Sequenced — preset
times and temperatures
can be sequenced auto-
matically (and can also
be randomly selected
from sequence stored.)
assembly into the gripper
mechanism.
Available in:
Americas
Europe
Asia Pacific
I
I
I
2-13
9-1773447-9
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
MACOM [ Tyco Electronics ]
