RAYCHEM Tubing Products
Model 81CE
Discrete Heater for Heat-
Shrinkable Tubing Products
Product Facts
I Closed-loop time and
temperature control
I Controlled process
I Adaptable for different
applications
2
I Bench top design
I CE approved for worldwide use
I Heater operation and over
temperature alarm lights
into the upper heating ele-
and load it into the spring
ment connected to a closed loaded jaws on either side
cient processing of either
single-wall or adhesive-
Applications
The Model 81CE is a CE
Certified discrete-type table
top heater which provides a
controlled process for
recovering a wide variety of
Raychem heat-shrinkable
products onto wire assem-
blies or other suitable sub-
strates.
loop temperature controller. of the heating chamber. The lined tubing. Temperature
An alarm light illuminates
whenever the actual heat-
ing element temperature
varies from the set point
temperature.
jaws grip and carry the
assembly into the heating
chamber and back to the
home position when the
time has expired. A protec-
tion circuit prevents the
cycle from being initiated if
the oven is not at the
desired set point, prevent-
ing assemblies from being
processed incorrectly. The
small footprint allows the
processor to be placed in
close proximity to a welder,
allowing a single operator
to accomplish two tasks.
and time can be controlled
to accommodate a wide
variety of products and
substrates.
Safety Features:
Controlled Oven Dwell Time
• Circuit breaker for current
surges
The oven dwell time is
selected using a 3-digit
thumb wheel digital timer.
The time can be set
Assemblies are loaded into
spring loaded jaws on
either side of the heating
chamber which takes the
assemblies into the oven for
a pre-set number of sec-
onds, then returns them to
the home position for
removal.
• Emergency Stop
• Pinch points eliminated
by the housing design
between 1 and 999 sec-
onds for precise heating
ensuring each assembly
being processed sees the
same precise amount of heat.
• An over-temperature
switch that shuts off all
power in the event of an
overheat condition
Versatility
• Automatic cool-down cir-
cuit to prevent heat dam-
age to integral
Minimal Skill Requirements
Controlled Heating Zone
The processor is designed
to process a broad range of
Raychem heat-shrinkable
tubing products up to
25 mm [1.0 in] in diameter
and 127 mm [5.0 in] in
There are clearly marked
guides for aligning the
assembly as well as the
tubing or device being
processed. The operator
only has to center the
assembly, then the tubing,
The Model 81 CE processor
has two stamped foil heating
elements that are manufac-
tured to a strict wattage
specification. Consistent
temperatures are controlled
by a thermocouple embedded
components
• Circuit to prevent cycle
initiation until the oven is
up to temperature
length. The infrared energy
source is well-suited to effi-
Available in:
Americas
Europe
Asia Pacific
I
I
I
2-11
9-1773447-9
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
MACOM [ Tyco Electronics ]
