Absolute Maximum Ratings
Table 4aꢀ Absolute maximum ratings for LUXEON Rebel Color Line at Tj=25°Cꢀ
FaR REd/
GREEn/Cyan/
BluE/Royal BluE
Es BluE/
Es Royal BluE
PaRamEtER
dEEP REd/REd/
PC amBER
REd-oRanGE/amBER
DC Forward Current[1, 2]
Peak Pulsed Forward Current[1, 3]
LED Junction Temperature[1] (DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature[1]
LED Storage Temperature
1000mA
1000mA
1000
1200
700mA
700mA
700mA
700mA
150°C
150°C
135°C
130°C
Class 3A
Class 3A
Class 3A
Class 3A
-40°C to 135°C
-40°C to 135°C
JEDEC 020c 260°C
3
-40°C to 135°C
-40°C to 135°C
JEDEC 020c 260°C
3
-40°C to 120°C
-40°C to 135°C
JEDEC 020c 260°C
3
-40°C to 110°C
-40°C to 135°C
JEDEC 020c 260°C
3
Soldering Temperature
Allowable Reflow Cycles
-121°C at 2 ATM
100% Relative Humidity for 96 Hours Maximum
Autoclave Conditions
Reverse Voltage (Vreverse
)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4a:
1. Proper current derating must be observed to maintain the junction temperature below the maximum.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
Table 4bꢀ Absolute maximum ratings for LUXEON Rebel Color Line at Tj=85°Cꢀ
PaRamEtER
lImE
DC Forward Current[1, 2]
Peak Pulsed Forward Current[1, 3]
LED Junction Temperature[1] (DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature[1]
LED Storage Temperature
1000
1200
150°C
Class 3A
-40°C to 135°C
-40°C to 135°C
JEDEC 020c 260°C
Soldering Temperature
Allowable Reflow Cycles
3
Autoclave Conditions
100% Relative Humidity for 96 Hours Maximum
LUXEON LEDs are not designed to be driven in reverse bias
Reverse Voltage (Vreverse
)
Notes for Table 4b:
1. Proper current derating must be observed to maintain the junction temperature below the maximum.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
5
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
