General Information
Product Nomenclature
LUXEON Q emitters are specified and binned “hot” under conditions comparable to those found in “real-world”
lighting products. The test conditions for LUXEON Q are 350mA DC with junction temperature at 85°C.
The part number designation is explained as follows:
L 1 Q 0 - x x y y 0 0 0 0 0 z z z 0
Where:
xx
—
—
—
designates nominal ANSI CCT (27 for 2700K, 30 for 3000K)
yy
zzz
designates minimum CRI performance (70 for 70CRI, 80 for 80CRI)
designates minimum flux performance at standard binning current and temperature (e.g.,
090 for 90 lumens, 110 for 110 lumens, etc). 000 designates full distribution flux performance.
Therefore, 80CRI products tested and binned at 3000K with a 110lm minimum flux at binning current and
temperature will have the part numbering scheme:
L1Q0-3080000001100
Therefore, 70CRI products tested and binned at 5700K with a 130lm minimum flux at binning current and
temperature will have the following part numbering scheme:
L1Q0-5770000001300
Average Lumen Maintenance Characteristics
LUXEON Q products are tested in compliance with LM-80. Please contact your local Lumileds Technical Solutions
Manager for TM-21 extrapolations or other support.
Environmental Compliance
Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Q
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS and REACH directives. Lumileds will not intentionally add the following restricted material to the
LUXEON Q: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS118 LUXEON Q Product Datasheet 20180327 ©2018 Lumileds Holding B.V. All rights reserved.
2
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
