Sterling-LWB5 Module
Datasheet
Calibration Current Profile
Although the Max continuous supply current to the module is <320 mA, when providing power to the module, a
power source capable of supplying 750 mA peak current for a duration of ~20 msec is required by the module
transmitter during calibration.
Figure 11 shows the current profile of the Sterling-LWB5 module during calibration. If current is limited to
<750mA during this process, the module will fail to calibrate.
Figure 11 Module RF Calibration Current Profile
The information in this document is subject to change without notice.
330-0208-R2.1
Copyright © 2016-2018 LSR
Page 32 of 80
LSTD [ Laird Connectivity ]
