Data Sheet
Austin SuperLynxTM 12V SMT Non-isolated Power Modules:
10 – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 16A output current
April 8, 2008
Feature Descriptions (continued)
Remote Sense
The Austin SuperLynxTM 12V 12V SMTpower modules
have a Remote Sense feature to minimize the effects of
distribution losses by regulating the voltage at the
Remote Sense pin (See Figure 31). The voltage between
the Sense pin and Vo pin must not exceed 0.5V.
The amount of power delivered by the module is defined
as the output voltage multiplied by the output current (Vo
x Io). When using Remote Sense, the output voltage of
the module can increase, which if the same output is
maintained, increases the power output by the module.
Make sure that the maximum output power of the module
remains at or below the maximum rated power. When
the Remote Sense feature is not being used, connect the
Remote Sense pin to output pin.
Rdistribution Rcontact
Rcontact Rdistribution
VIN(+)
VO
Sense
RLOAD
Rdistribution Rcontact
Rcontact Rdistribution
COM
COM
Figure 31. Remote sense circuit configuration.
LINEAGE POWER
14
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
