Data Sheet
Austin LynxTM II SIP Non-isolated Power Modules:
March 12, 2009
2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current
Characteristic Curves (continued)
The following figures provide typical characteristics for the Austin LynxTM II SIP modules at 25ºC.
10
Io=10A
9
Io=5A
8
Io=0A
7
6
5
4
3
2
1
0
0.5
1.5
2.5
3.5
4.5
5.5
INPUT VOLTAGE, VIN (V)
TIME, t (10μs/div)
Figure 7. Input voltage vs. Input Current (Vo =
2.5Vdc).
Figure 10. Transient Response to Dynamic Load
Change from 50% to 100% of full load (Vo = 3.3Vdc).
TIME, t (2μs/div)
Figure 8. Typical Output Ripple and Noise
(Vin = 5.0V dc, Vo = 0.75, Vdc, Io=10A).
TIME, t (10μs/div)
Figure 11. Transient Response to Dynamic Load
Change from 100% to 50% of full load (Vo = 3.3 Vdc).
TIME, t (2μs/div)
Figure 9. Typical Output Ripple and Noise
(Vin = 5.0V dc, Vo = 3.3 Vdc, Io=10A).
TIME, t (20μs/div)
Figure 12. Transient Response to Dynamic Load
Change from 50% to 100% of full load (Vo = 3.3 Vdc,
Cext = 2x150 μF Polymer Capacitors).
LINEAGE POWER
7
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
