LB121S03
Liquid Crystal Display
Product Specification
Note)
1. Contrast Ratio(CR) is defined mathematically as
Surface Luminance with all white pixels
Contrast Ratio =
Surface Luminance with all black pixels
2. Surface luminance is the center point across the LCD surface 50cm from the surface with all pixels
displaying white. For more information see FIG 1.
3. The variation in surface luminance , The Panel total variation (d WHITE) is determined by measuring LN
at each test position 1 through 5, and then dividing the maximum LN of 5 points luminance by
minimum LN of 5 points luminance. For more information see FIG 2.
d
WHITE = Maximum(L1,L2, … L5) / Minimum(L1,L2, … L5)
4. Response time is the time required for the display to transition from white to black (rise time, TrR) and
from black to white(Decay Time, TrD). For additional information see FIG 3.
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determ ined
for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the
LCD surface. For more information see FIG 4.
6. Gray scale specification
* fV=60Hz
Luminance [%] (Typ)
Gray Level
L0
0.2
0.8
L7
L15
4.0
L23
10.5
19.5
33.0
52.0
75.0
100
L31
L39
L47
L55
L63
13 / 23
Ver. 0.0
Feb. 27, 2006
PDF created with pdfFactory trial version www.pdffactory.com