ABSOLUTE MAXIMUM RATINGS
OPERATING RANGES
Storage Temperature . . . . . . . . . . . . . .-65°C to +150°C
Commercial (C) Devices
Ambient Temperature
With Power Applied . . . . . . . . . . . . . .-55°C to +125°C
Ambient Temperature (T )
A
Operating in Free Air . . . . . . . . . . . . . . . 0°C to +70°C
Device Junction Temperature . . . . . . . . . . . . . +150°C
Supply Voltage (V
)
CC
with Respect to Ground . . . . . . . . . +4.75 V to +5.25 V
Supply Voltage with
Respect to Ground . . . . . . . . . . . . . . . -0.5 V to +7.0 V
Operating ranges define those limits between which the func-
tionality of the device is guaranteed.
DC Input Voltage . . . . . . . . . . . . -0.5 V to V +0.5 V
CC
Industrial (I) Devices
DC Output or I/O Pin Voltage . . -0.5 V to V +0.5 V
CC
Static Discharge Voltage . . . . . . . . . . . . . . . . . 2001 V
Ambient Temperature (T )
A
Operating in Free Air . . . . . . . . . . . . . . -40°C to +85°C
Latchup Current (T = -40°C to +85°C). . . . . . . 200 mA
A
Supply Voltage (V
with Respect to Ground . . . . . . . . . . . +4.5 V to +5.5 V
)
CC
Stresses above those listed under Absolute Maximum Ratings
may cause permanent device failure. Functionality at or above
these limits is not implied. Exposure to Absolute Maximum Rat-
ings for extended periods may affect device reliability.
Operating ranges define those limits between which the
functionality of the device is guaranteed.
DC CHARACTERISTICS OVER OPERATING RANGES
Parameter
Symbol
Parameter Description
Output HIGH Voltage
Test Description
= –3.2 mA, V = Min, V = V or V
IL
Min
Typ
Max
Unit
V
I
2.4
OH
CC
IN
IH
V
OH
I
= –300 µA, V = Max, V = V or V (Note 1)
3.5
0.5
V
OH
CC
IN
IH
IL
V
Output LOW Voltage
Input HIGH Voltage
I
= 16 mA, V = Min, V = V or V (Note 2)
V
OL
OL
CC
IN
IH
IL
Guaranteed Input Logical HIGH Voltage for all Inputs
(Note 3)
V
2.0
V
V
IH
Guaranteed Input Logical LOW Voltage for all Inputs
(Note 3)
V
Input LOW Voltage
0.8
IL
I
Input HIGH Leakage Current
Input LOW Leakage Current
V = 5.25 V, V V = Max (Note 4)
10
–10
10
µA
µA
µA
µA
IH
IN
CC
I
V = 0 V, V = Max (Note 4)
IN CC
IL
I
Off-State Output Leakage Current HIGH V = 5.25 V, V = Max, V = V or V (Note 4)
OUT CC IN IH IL
OZH
I
Off-State Output Leakage Current LOW V = 0 V, V = Max, V = V or V (Note 4)
–10
OZL
OUT
CC
IN
IH
IL
–130 (Note 6),
–160
I
Output Short-Circuit Current
V
= 0.5 V V = Max (Note 5)
–30
mA
SC
OUT
CC
Notes:
1. This applies to MACH111SP, MACH131SP, and die code “B” or later for MACH211(SP) and MACH231(SP). This does not apply
to MACH111, MACH131, MACH221(SP), and die code “A” for MACH211(SP) and MACH231(SP).
2. Total I for one PAL block should not exceed 64 mA.
OL
3. These are absolute values with respect to device ground, and all overshoots due to system and/or tester noise are included.
4. I/O pin leakage is the worst case of I and I
IL OZL
(or I and I ).
IH OZH
5. Not more than one output should be shorted at a time. Duration of the short-circuit should not exceed one second.
= 0.5 V has been chosen to avoid test problems caused by tester ground degradation.
V
OUT
6. For commercial temperature range only.
24
MACH 1 & 2 Families