Specifications GAL16LV8ZD
Complex Mode
In the Complex mode, macrocells are configured as output only or All macrocells have seven product terms per output. One product
I/O functions.
term is used for programmable output enable control. Pins 1 and
11 are always available as data inputs into the AND array.
Architecture configurations available in this mode are similar to the
common 16L8 and 16P8 devices with programmable polarity in Pin 4 is used as dedicated power-down pin on GAL16LV8ZD. It
each macrocell. cannot be used as functional input.
Up to six I/Os are possible in this mode. Dedicated inputs or outputs The JEDEC fuse numbers including the UES fuses and PTD fuses
can be implemented as subsets of the I/O function. The two outer are shown on the logic diagram on the following page.
most macrocells (pins 12 & 19) do not have input capability. De-
signs requiring eight I/Os can be implemented in the Registered
mode.
Combinatorial I/O Configuration for Complex Mode
- SYN=1.
- AC0=1.
- XOR=0 defines Active Low Output.
- XOR=1 defines Active High Output.
XOR
- AC1 has no effect on this mode.
- Pin 13 through Pin 18 are configured to this function.
Combinatorial Output Configuration for Complex Mode
- SYN=1.
- AC0=1.
- XOR=0 defines Active Low Output.
- XOR=1 defines Active High Output.
- AC1 has no effect on this mode.
- Pin 12 and Pin 19 are configured to this
function.
XOR
Note: The development software configures all of the architecture control bits and checks for proper pin usage automatically.
6
LATTICE [ LATTICE SEMICONDUCTOR ]
