Specifications GAL16LV8ZD
Registered Mode
Registered outputs have eight product terms per output. I/Os have
seven product terms per output.
In the Registered mode, macrocells are configured as dedicated
registered outputs or as I/O functions.
Pin 4 is used as dedicated power-down pin on GAL16LV8ZD. It
cannot be used as functional input.
Architecture configurations available in this mode are similar to the
common 16R8 and 16RP4 devices with various permutations of
polarity, I/O and register placement.
The JEDEC fuse numbers, including the User Electronic Signature
(UES) fuses and the Product Term Disable (PTD) fuses, are shown
on the logic diagram on the following page.
All registered macrocells share common clock and output enable
control pins. Any macrocell can be configured as registered or I/
O. Up to eight registers or up to eight I/Os are possible in this mode.
Dedicated input or output functions can be implemented as sub-
sets of the I/O function.
CLK
Registered Configuration for Registered Mode
- SYN=0.
- AC0=1.
- XOR=0 defines Active Low Output.
- XOR=1 defines Active High Output.
- AC1=0 defines this output configuration.
- Pin 1 controls common CLK for the registered outputs.
D
Q
Q
- Pin 11 controls common OE for the registered outputs.
XOR
- Pin 1 & Pin 11 are permanently configured as CLK & OE
for registered output configuration.
OE
Combinatorial Configuration for Registered Mode
- SYN=0.
- AC0=1.
- XOR=0 defines Active Low Output.
- XOR=1 defines Active High Output.
- AC1=1 defines this output configuration.
XOR
- Pin 1 & Pin 11 are permanently configured as CLK & OE
for registered output configuration.
Note: The development software configures all of the architecture control bits and checks for proper pin usage automatically.
4
LATTICE [ LATTICE SEMICONDUCTOR ]
