Surface Mount EMI Filters — E03 X2Y IPCs
The X2Y Integrated Passive Component is a 3-terminal EMI chip device.
When used in balanced line applications, the revolutionary design provides simultaneous line-to-line and line-to-ground
filtering, using a single ceramic chip. In this way, differential and common mode filtering are provided in one device.
For unbalanced applications, it provides ultra-low ESL (equivalent series inductance). Capable of replacing two or more
conventional devices, it is ideal for balanced and unbalanced lines, twisted pairs and dc motors, in automotive, audio,
sensor and other applications.
Available in sizes from 0805 to 1812, these filters can prove invaluable in meeting stringent EMC demands.
Dielectric:
X7R (2R1) or C0G/NP0 (1B)
Capacitance measurement:
At 1,000-hr point
Temperature rating:
-55°C to +125°C
Dielectric withstand voltage:
≤200V 2.5 times rated Volts for
5 secs. 500V 1.5 times rated
Volts for 5 secs. Charging
Electrical configuration:
Multiple capacitance
Typical capacitance matching:
Better than 5ꢀ (down to 1ꢀ
available on request)
Insulation resistance:
100GΩ or 1000s (whichever is
the least)
current limited to 50mA Max.
STANDARD RANGE ꢂE03ꢃ — CAPACITANCE VALUES
TYPE
E03
Chip Size
Dielectric
0805
1206
1410
1812
Rated Voltage
C0G/NP0 (1B)
X7R (2R1)
560pF - 820pF
1.8nF - 3.3nF
-
6.8nF - 8.2nF
470nF - 470nF
4.7nF - 5.6nF
180nF - 400nF
100pF - 3.9nF
4.7nF - 150nF
100pF - 3.3nF
1.2nF - 120nF
-
12nF - 15nF
820nF - 820nF
8.2nF - 10nF
25Vdc
56nF - 68nF
C0G/NP0 (1B)
X7R (2R1)
390pF - 470pF
1.2nF - 1.5nF
56nF - 220nF
22pF - 1nF
1.5nF - 47nF
22pF - 1nF
820pF - 33nF
-
50Vdc
100Vdc
200Vdc
500Vdc
18nF - 47nF
390nF - 680nF
820pF - 6.8nF
8.2nF - 330nF
820pF - 5.6nF
2.7nF - 180nF
820pF - 3.9nF
2.7nF - 100nF
C0G/NP0 (1B)
X7R (2R1)
10pF - 330pF
470pF - 15nF
C0G/NP0 (1B)
X7R (2R1)
-
-
-
-
C0G/NP0 (1B)
X7R (2R1)
-
-
Note: For some lower capacitance parts, higher voltage rated parts may be supplied.
42
KNOWLES [ KNOWLES ELECTRONICS ]
