Surface Mount EMI Filters —E01 and E07 Ranges
The E01 and E07 ranges of feedthrough MLCC chip "C" filters are 3-terminal chip devices designed to offer reduced inductance
compared to conventional MLCCs when used in signal line filtering. The filtered signal passes through the chip internal electrodes and
the noise is filtered to the grounded side contacts, resulting in reduced length noise transmission paths.
Available in C0G/NP0 (1B) and X7R (2R1) dielectrics, with current ratings of 300mA, 1A, 2A, 3A and voltage ratings of 25Vdc to 200Vdc.
Also available with FlexiCap™ termination, which is strongly recommended for new designs.
Commonly used in automotive applications, a range qualified to AEC-Q200 is also available.
E01300mA, E071A/2A/3A
DIMENSIONS
0805
1206
1806
1812
0805
1206
1806
1812
2.0 0.3
(0.079 0.012)
3.2 0.3
(0.126 0.012)
4.5 0.35
(0.177 0.014)
4.5 0.35
(0.177 0.014)
A
B
C
D
E
0.95 (0.037)
0.90 (0.035)
0.30 (0.012)
0.40 (0.016)
0.75 (0.030)
0.56 (0.022)
1.20 (0.047)
0.90 (0.035)
0.60 (0.024)
0.80 (0.031)
1.0 (0.039)
1.2 (0.047)
1.40 (0.055)
0.80 (0.031)
1.40 (0.055)
1.0 (0.039)
2.65 (0.104)
1.40 (0.055)
0.80 (0.031)
1.40 (0.055)
2.05 (0.080)
1.08 (0.043)
L
W
T
1.25 0.2
(0.049 0.008)
1.6 0.2
(0.063 0.008)
1.6 0.2
(0.063 0.008)
3.2 0.3
(0.126 0.012)
1.0 0.15
(0.039 0.006)
1.1 0.2
(0.043 0.008)
1.1 0.2
(0.043 0.008)
2.0 0.3
(0.079 0.012)
F
0.70 (0.028)
0.70 (0.028)
0.60 0.2
(0.024 0.008)
0.95 0.3
(0.037 0.012)
1.4 0.3
(0.055 0.012)
1.45 0.35
(0.055 0.014)
B1
B2
Notes: 1) All dimensions mm (inches). 2) Pad widths less than chip width gives improved
mechanical performance. 3) The solder stencil should place 4 discrete solder pads.
The unprinted distance between ground pads is shown as dim E. 4) Insulating the
earth track underneath the filters is acceptable and can help avoid displacement of
filter during soldering but can result in residue entrapment under the chip.
0.3 0.15
(0.012 0.006)
0.5 0.25
(0.02 0.01)
0.5 0.25
(0.02 0.01)
0.75 0.25
(0.03 0.01)
STANDARD RANGE ꢂE01, E07ꢃ — CAPACITANCE VALUES
TYPE
E01
E07
Chip Size
0805
1206
1806
0805
1206
1806
1812
Max Current
300mA
300mA
300mA
1A
2A
2A
3A
Rated Voltage
Dielectric
Minimum and maximum capacitance values
25Vdc
C0G/NP0 (1B)
X7R (2R1)
180pF - 1.5nF
470pF - 100nF
22pF - 820pF
560pF - 68nF
22pF - 560pF
560pF - 27nF
-
560pF - 3.9nF
5.6nF - 330nF
22pF - 3.3nF
4.7nF - 220nF
22pF - 2.2nF
1.8nF - 100nF
560pF - 1.2nF
2.7nF - 56nF
820pF - 4.7nF
180pF - 1.5nF
820pF - 100nF
10pF - 220pF
1nF - 68nF
10pF - 120pF
1nF - 27nF
-
560pF-3.9nF
820pF-4.7nF
22nF - 560nF
100pF - 1.5nF
22nF - 330nF
100pF - 680pF
22nF - 180nF
56pF - 470pF
22nF - 100nF
-
3.9nF - 560nF
22pF - 3.9nF
3.3nF - 330nF
22pF - 3.3nF
3.3nF - 180nF
56pF - 1nF
10nF - 330nF
22pF - 1nF
560nF - 1.8µF
50Vdc
C0G/NP0 (1B)
X7R (2R1)
-
10nF - 220nF
22pF - 560pF
10nF - 100nF
15pF - 180pF
12nF - 56nF
330nF - 1.5µF
100Vdc
200Vdc
C0G/NP0 (1B)
X7R (2R1)
-
180nF - 820nF
-
C0G/NP0 (1B)
X7R (2R1)
-
3.9nF - 100nF
-
100nF - 270nF
Note: E07 25Vdc C0G/NP0 (1B) 1206 and 1806 ranges in green, have a maximum current of 1A.
40
KNOWLES [ KNOWLES ELECTRONICS ]
