11 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Technical Specifications
Regulatoryꢀcharateristics
Safety
Complies with the essential requirements of the European LVD Directive of the following standards (dates and editions are
cited in the Declaration of Conformity):
– IEC/EN 61010-1
– Canada: CSA C22.2 No. 61010-1
– USA: UL std no. 61010-1
Acoustic statement
(European Machinery
Directive)
Acoustic noise emission
LpA < 70 dB
Operator position
Normal operation mode per ISO 7779
EMC
Complies with European EMC Directive of the following standards (dates and editions are cited in the Declaration of
Conformity):
- IEC/EN 61326-1
- CISPR pub 11 group 1, class A
- AS/NZS CISPR 11
- ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada
M9018B/M9019A Rack Mounting
The M9018B and M9019A rack mount accessory kits provide system design flexibility. The following kits can be mix-and-matched to
suit the needs of a given application:
–
Y1215C Flush mount rack kit (Figure 6): Complete kit including rack flanges, handles, and attachment hardware. The kit sus-
pends the chassis in a Keysight rack using only 4U of rack space. Rack rails may be needed in a non-Keysight rack.
Y1216B Recess mount rack kit (Figure 7): Complete recess-mount kit including rack flanges, handles, and attachment hardware.
The kit recesses the chassis by 4 inches and suspends the chassis in a Keysight rack using only 4U of rack space. Rack rails may
be needed in a non-Keysight rack.
–
–
–
Y1217B Rack mount rail kit (Figure 7): This optional kit provides additional stability to the chassis when rack-mounted. When
using rails, the chassis will require 5U of rack space. Rails may not fit in a non-Keysight rack.
Y1218A Cable tray kit (Figure 7): Adds a 1U high cable tray to the chassis and includes cable tray, feet for using the chassis/tray
on a table, and attachment hardware.
Figure 6. M9018B and M9019A chassis suspended in a rack using the
Y1215C.
Figure 7. M9018B and M9019A chassis rack-mounted using the Y1216A,
Y1217A, and Y1218A.
Note: Rack mounting the M9018B and M9019A may require two people if rails are not used. Care must also be taken to ensure the
chassis receives sufficient cooling air. See the chassis cooling characteristics in this data sheet for more details.