07 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Definitions
Specification
Warranted performance. Specifications include guardbands to account for the expected statistical performance distribution, measurement uncertainties,
and changes in performance due to environmental conditions. All specifications and characteristics apply over the operating environment outlined in the
“Environmental and Regulatory” section of this data sheet. In addition, the following conditions must be met:
– Instrument is within its calibration cycle if calibration is required.
– Instrument has been stored for a minimum of 1 hour within the operating temperature range prior to turn-on and after a 30 minute warm-up period.
Characteristicsꢀ
ꢀ
Characteristics describe product performance that is useful in the application of the product, but that is not covered by the product warranty. Character-
istics are often referred to as Typical or Nominal values.
Typicalꢀ
ꢀ
Expected performance of an average unit when operated over a 20 to 30 °C temperature range. Typical performance is not warranted. The instrument
must be within its calibration cycle if calibration is required.
Nominal
Nominal describes representative performance that is useful in the application of the product when operated over a 20 to 30 °C temperature range.
Nominal performance is not warranted.
Additionalꢀinformationꢀ
ꢀ
All data are measured from multiple units at room temperature and are representative of product performance within the operating temperature range
unless otherwise noted.
The specifications contained in this document are subject to change.
KEYSIGHT [ Keysight Technologies ]
