欢迎访问ic37.com |
会员登录 免费注册
发布采购

N9913A-211 参数 Datasheet PDF下载

N9913A-211图片预览
型号: N9913A-211
PDF下载: 下载PDF文件 查看货源
内容描述: [FieldFox Handheld Analyzers]
分类和应用:
文件页数/大小: 48 页 / 6709 K
品牌: KEYSIGHT [ Keysight Technologies ]
 浏览型号N9913A-211的Datasheet PDF文件第27页浏览型号N9913A-211的Datasheet PDF文件第28页浏览型号N9913A-211的Datasheet PDF文件第29页浏览型号N9913A-211的Datasheet PDF文件第30页浏览型号N9913A-211的Datasheet PDF文件第32页浏览型号N9913A-211的Datasheet PDF文件第33页浏览型号N9913A-211的Datasheet PDF文件第34页浏览型号N9913A-211的Datasheet PDF文件第35页  
31 | Keysight | FieldFox Handheld Analyzers 4/6.5/9/14/18/26.5/32/44/50 GHz - Data Sheet  
Real-Time Spectrum Analyzer (RTSA)  
The performance listed in this section applies to the real-time spectrum analyzer capabilities available in the following models:  
– FieldFox RF & microwave analyzers: N9913A, N9914A, N9915A, N9916A, N9917A, N9918A  
N9950A, N9951A, N9952A  
– FieldFox microwave spectrum analyzers: N9935A, N9936A, N9937A, N9938A  
N9960A, N9961A, N9962A  
See FieldFox Configuration Guide for option information. Many capabilities listed in this Data Sheet require options.  
Models  
Real-time analysis frequency range  
100 kHz to 4 GHz  
N991xA, N993xA  
N995xA, N996xA  
N9913A  
Usable to 5 kHz  
Usable to 5 kHz  
Usable to 5 kHz  
Usable to 5 kHz  
Usable to 5 kHz  
Usable to 5 kHz  
Usable to 5 kHz  
Usable to 5 kHz  
Usable to 5 kHz  
N9914A  
100 kHz to 6.5 GHz  
100 kHz to 9 GHz  
N9915A, N9935A  
N9916A, N9936A  
N9917A, N9937A  
N9918A, N9938A  
N9950A, N9960A  
N9951A, N9961A  
N9952A, N9962A  
100 kHz to 14 GHz  
100 kHz to 18 GHz  
100 kHz to 26.5 GHz  
9 kHz to 32 GHz  
9 kHz to 44 GHz  
9 kHz to 50 GHz  
Real-time analysis  
Maximum real-time bandwidth  
Resolution bandwidth  
10 MHz  
1 Hz to 500 kHz  
Span dependent, 20 ≤ Span/RBW ≤ 280. Default  
is 35.7 kHz  
Minimum signal duration with 100% probability of intercept (POI)  
at full amplitude accuracy  
12.2 µs  
22 ns  
At 10 MHz span, 500 Hz RBW  
Minimum detectable signal  
Absolute amplitude accuracy at center frequency  
Minimum pulse signal duration where measured  
amplitude is no worse than 60 dB below a CW  
signal for a 10 MHz span and auto coupled RBW  
Spurious-free dynamic range across maximum BW  
63 dB  
FFT rate  
120,000 FFT/s  
+/- 0.2 dB <= 26.5 GHz,  
561  
At 10 MHz span  
IF flatness (typical)  
Number of display points  
Min. acquisition time  
Max. acquisition time  
Traces  
+/- 0.3 dB > 26.5 GHz  
20 ms  
At 10 MHz span  
At 10 MHz span  
500 ms  
Number of traces  
Detectors  
4: all four can be active simultaneously and in different states  
Normal, positive peak, negative peak, sample, average (RMS)  
Clear/write, max. hold, min. hold, average, view, blank  
States  
Markers  
Number of markers  
Type  
6
Normal, delta, peak  
Marker →  
Peak, next peak, center frequency, reference level, minimum  
Trigger  
Trigger type  
Free run, external video, RF burst, periodic  
 复制成功!