Cable and Antenna Analyzer (continued)
Specification
Typical
90 minute warm up
10 minute warm up
Directivity
Corrected with OSL calibration 1
> 42 dB
> 42 dB
Corrected with QuickCal (Option 111) 2
Raw
≥ 42 dB
2 MHz to 3.5 GHz
> 3.5 to 6 GHz
> 20 dB
> 14 dB
Source Match
Corrected with OSL calibration 1
> 36 dB
> 36 dB
Corrected with QuickCal (Option 111) 2
≥ 35 dB
Raw
2 MHz to 3 GHz
> 3 to 6 GHz
> 25 dB
> 16 dB
Reflection Tracking
Corrected with OSL calibration 1
± 0.06 dB
± 0.06 dB
Corrected with QuickCal (Option 111) 2
± 0.15 dB
Reflection Dynamic Range
Reflection (RF Out port) (High power out)
2 MHz to 4 GHz
60 dB
55 dB
> 4 to 6 GHz
Maximum Measurable Cable Loss Using 1–Port CAT Measurement Model 3
Refl Dyn Range /2
1.
2.
3.
Using recommended calibration kits
QuickCal is performed with the connect LOAD step
Higher cable losses can be measured using transmission or S21 measurements. Cable losses measured in transmission mode limited
by transmission dynamic range
6
KEYSIGHT [ Keysight Technologies ]
