06 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet
Analog I/O Specification (M9341B Only)
Description
Specification
Typical/ General Characteristics
Input Ports
Number of Ports
Connector Type
4
MCX female
Input Voltage Range
Input Impedance
Measurement Accuracy1
±10 V, ±5 V, and ±1 V (selectable)
10 MΩ (nom), > 1 kΩ (at power off state)
At measurement time = 10 ms
±(0.1% reading + 0.2% range)
Damage Level
±15 V
Output Ports
Number of Ports
2
MCX female
Connector Type
±10 V
Output Voltage Range
Output Voltage Resolution
Maximum Output Current
1 mV
Mode 1: ±500 mA (Port 1) and ±100 mA (Port 2)
Mode 2: ±50 mA (Ports 1 and 2)
Mode 1: 0 Ω (nom), Mode 2: 50 Ω (nom)
2 mVrms (20 Hz – 20 MHz)
±(0.14% + 14 mV) at no load with user compensation
±(0.42% + 40 mV) at no load without user compensation
At measurement time = 10 ms
Output Impedance (at Port)
Output Voltage Ripple and Noise
Output Voltage Accuracy1, 2
±(0.2% + 20 mV) at no load with user compensation
Output Current Monitor Accuracy
Mode 1: ±(1% + 7 mA)
Mode 2: ±(1% + 1 mA)
Sync Ports Specification
Description
Sync 1 to 3
Logic
Connector Type
Typical
SMB male
3.3 V TTL
Miscellaneous
Description
General Characteristics
Size
1 PXIe slot, compatible with PXI hybrid slots
212 mm x 20 mm x 128 mm
Dimensions
Weight (net)
Power Drawn from Chassis3
330 g (M9341A), 490 g (M9341B)
5.2 W max (M9341A), 32.0 W max (M9341B)
+3.3 V: 0.73 A (M9341A), 2.80 A (M9341B)
+5 V: 0 A
+12 V: 0.23 A (M9341A), 1.96 A (M9341B)
-12 V: 0 A
1. This specification is applied at single usage in the chassis and may be affected by grounding condition.
2. Validation of user compensation: 1 hour and ±3 °C from user compensation. Additional error (typ): 6 mV at 100 mA output (load ≥ 12.1 Ω); 21 mV at 500 mA
output (load ≥ 2.2 Ω)
3. At maximum load: Output current from Analog Out Port 1, Analog Out Port 2, +5VIO of 24-bit I/O, and VIO of 8-bit I/O are 500 mA, 100 mA, 100mA, and
100 mA, respectively.