02 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet
M9341A
Overview
The Keysight M9341A Digital I/O with the 24-bit digital I/O connector and triggering
ports provides communication signals between the PXI vector network analyzer (VNA)
installed in the same PXI chassis and an external handler.
This allows the PXI VNA such as the Keysight M937xA and M9485A to be used in an
automated test environment, where devices to be tested are inserted into a test fixture
by a part handler, and sorted into pass/fail bins by the handler after testing is complete.
By connecting the part handler to the M9341A digital I/O connector, the VNA and part
handler can synchronize their activities in a way that makes automated testing possible.
The M9341A digital I/O also compatible with the 24-bit digital I/O connector on the rear
panel of the Keysight PNA and ENA Series.
Key specifications/features
– Digital I/O for communication for the PXI VNA with external peripherals (i.e.
handler)
– Synchronized measurements with the PXI VNA in an automated test environment
– Compatible with the 24-bit digital I/O connector on the PNA and ENA
KEYSIGHT [ Keysight Technologies ]
