07 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
M9132A PXI SPST switch: 50-ch, reed relays
M9132A specifications and characteristics
The M9132A switch module is a general purpose, 50- channel,
single-pole, single-throw (Form A) switch array. The module is
designed with high-speed reed relays that enable switching for
signals up to 100 Vrms and 1 A to 25 W power. The switches are
ideal for powering your product on/off under test, or to actuate
power relays and solenoids. Easily connect to the module through
a high-density, 200-pin, low force helix (LFH) connector or cable.
General specifications
Channels
Switch type
Max volts
Max current switch/carry
Switching characteristics (nominal)
Max power
50
SPDT, Form A, reed
100 Vrms
1 A/1 A
25 W
Switch speed (typical)
Inital path resistance (typical)
Connectors
.35 msec
<500 mΩ
200 LFHconnector block
or cable
Bandwidth
5 MHz
DC isolation, Ch-Ch, Ch-Gnd
25C / 40%RH (typical)
25C / 80%RH (typical)
40C / 80%RH typical)
Thermal offset (typical)
Relay life, operations1
Low power load (typical)
Rated power load (typical)
1x1010 Ω
1x108 Ω
1x106 Ω
50 μV
1x109
>1x10 6
1. Relay life is defined as path resistance <1.3 Ω
Figure 6. M9132A 50-ch, SPST, reed relays.
KEYSIGHT [ Keysight Technologies ]
