05 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
M9130A PXI SPDT switch: 26-ch, armature relays
M9130A specifications and characteristics
The M9130A provides 26 channels using single-pole, double-
throw (Form C) armature relays. This module design allows you
to switch voltages up to 250 Vrms and current up to 2 A. The
M9130A module is ideal for switching medium-power AC and
DC loads, or slave-switching larger relays or solenoids. Easily
connect to the front panel using a 78-pin, Dsub connector or
cable.
General specifications
Channels
Switch type
Max volts
Max current switch/carry
Switching characteristics (nominal)
Max power
26
SPDT, Form C, armature
250 Vrms
2A/2A
60 W
Switch speed (typical)
Inital path resistance (typical)
Connectors
2.7 msec
< 500 mΩ
78 Dsub
connector block or cable
5 MHz
Bandwidth
DC isolation, Ch-Ch, Ch-Gnd
25C / 40%RH (typical)
25C / 80%RH (typical)
40C / 80%RH (typical)
Thermal offset (typical)
Relay life, operations
Low power load (typical)
Rated power load (typical)
1x1010 Ω
1x108 Ω
1x107 Ω
15 μV
> 2.5x106
> 1x105
Figure 3. 78-pin Dsub connector block
Figure 2. M9130A 26-ch, SPDT, armature relays
KEYSIGHT [ Keysight Technologies ]
