08 | Keysight | PXI Multiplexer Switch Modules M9101A, M9102A, M9103A – Data Sheet
Specifications and Characteristics
General specifications
Slot type
PXI 1-slot
Connector type
200 LFH connector block or cable
Environmental characteristics 1, 2
Temperature
Operating: 0 to 55 °C
Non-operating: –40 to +70 °C
Relative humidity
EMC
Relative humidity: Up to 95% R.H. at 40 °C, non-condensing, pollution degree 1
European EMC Directive 2004/108/EC
– IEC/EN 61326-1
– CISPR Pub 11 Group 1, Class A
– AS/NZS CISPR 11
– ICES/NMB-001
Canadian ISM device ICS-001
Safety
European Low Voltage Directive 2006/95/EC
– ETL, UL/IEC/EN 61010-1, 2nd Edition
Altitude under relative humidity
Warm-up time
Altitude: up to 4.6 km (15,000 ft)
15 minutes, max
1. Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the
environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to temperature, humidity, shock,
vibration, altitude, and power line conditions.
2. Test methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F class 3.
Physical characteristics
Dimensions
– 3U/1-slot PXI/CompactPCI standard
– Connector slot compatibility: cPCI (J1), PXI-1, PXIe hybrid slot
– Front panel complies with IEEE1101.10 certification and compliance
Weight
M9101A
M9102A
M9103A
220 g
220 g
230 g
(0.49 lbs)
(0.49 lbs)
(0.51 lbs)
Power requirements
M9101A
M9102A
M9103A
+3.3 V
+5 V
0
0
0
134 mA (280 mA) (typ)
134 mA (280 mA) (typ)
300 mA (typ)
+12 V
0
0
0
KEYSIGHT [ Keysight Technologies ]
