10 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
Specifications/Characteristics (Continued)
RS232/UART specifications/characteristics (DSOX2COMP, DSOX3COMP, DSOX4COMP and DSOX6COMP)
Tx and Rx input source
Analog channels 1, 2, 3, or 4
Digital channels D0 to D15 (3000, 4000 and 6000 X-Series only)
Bus configuration
– Baud rates
– Number of bits
– Parity
– Polarity
– Bit order
100 b/s up to 8 Mb/s
5 to 9
None, odd, or even
Idle low or idle high
LSB out first or MSB out first
Rx start bit
Triggering
Rx stop bit
Rx data
Rx 1:data (9-bit format)
Rx 0:data (9-bit format)
Rx X:data (9-bit format)
Rx or Tx parity error
Tx start bit
Tx stop bit
Tx data
Tx 1:data (9-bit format)
Tx 0:data (9-bit format)
Tx X:data (9-bit format)
Burst (nth frame within burst defined by timeout)
Hardware-based decode
– Number of decode traces
– Data format
2 independent traces (Tx and Rx)
Binary, hex, or ASCII-code characters
– Data byte display
– Idle bus trace
White characters if no parity error, red characters if parity or bus error
Mid-level bus trace in blue
– Active bus trace
Multi-bus analysis
Bi-level trace in blue
RS232/UART plus one other serial bus, including another RS232/UART bus. (3000, 4000 and 6000 X-Series
only)
Totalize/counter function
Total received frames
Total transmitted frames
Total parity error frames (with percentage)
KEYSIGHT [ Keysight Technologies ]
