26 | Keysight | InfiniiVision 4000 X-Series Oscilloscopes - Data Sheet
Oscilloscope Experience Redefined:
InfiniiVision 4000 X-Series Performance Characteristics
DSO and MSO 4000 X-Series oscilloscopes
4000 X-Series specification overview
4022A
200 MHz
200 MHz
≤ 1.75 ns
2
4024A
4032A
350 MHz
350 MHz
≤ 1 ns
2
4034A
4052A
500 MHz
500 MHz
≤ 700 ps
2
4054A
4104A
1 GHz
1 GHz
≤ 450 ps
4
4154A
1.5 GHz 3
1 GHz
≤ 300 ps
4
Bandwidth 1 (–3 dB)
All-channel real-time bandwidth
Calculated rise time (10 to 90%)
Input channels
DSOX
MSOX
4
4
4
2 + 16
4 + 16
2 + 16
4 + 16
2 + 16
4 + 16
4 + 16
4 + 16
Maximum sample rate
Maximum memory depth
Display size and type
Waveform update rate
5 GSa/s half channel, 2.5 GSa/s all channel
Standard 4 Mpts, standard segmented memory
12.1-inch high-definition capacitive touch display
> 1 million waveforms per second
System bandwidth with N2894A standard 200 MHz
passive probe
200 MHz
350 MHz
350 MHz
500 MHz
500 MHz
700 MHz
700 MHz
System analog channels
Hardware bandwidth limits
Input coupling
Approximately 20 MHz (selectable)
AC, DC
Input impedance
Input sensitivity range
Selectable: 1 MΩ ± 1% (16 pF), 50 Ω ± 1.5%
200 MHz ~ 500 MHz models: 1 mV/div to 5 V/div 2 (1 MΩ and 50 Ω)
1 and 1.5 GHz models: 1 mV/div to 5 V/div 2 (1 MΩ), 1 mV/div to 1 V/div (50 Ω)
8 bits (measurement resolution is 12 bits with averaging)
Vertical resolution
Maximum input voltage
1 MΩ
50 Ω
300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk. Frequency derating (assumes sine
wave input): 400 Vpk until 40 kHz. Then derates at 20 db/dec until 6 Vpk
50 Ω: ≤ 5 Vrms max
DC vertical gain accuracy 1
DC vertical offset accuracy
Channel-to-channel isolation
± 2.0% full scale 2
± 0.1 div ± 2 mV ± 1% of offset setting
200 MHz~1 GHz
1.5 GHz
≥ 40 dB from DC to maximum specified bandwidth of each model
≥ 40 dB from DC to 1 GHz, ≥ 35 dB from 1 to 1.5 GHz
± 5 V (< 10 mV/div), ± 20 V (10 to 200 mV/div), ± 75 V (> 200 mV/div)
Offset range
Vertical system digital channels
Digital input channels
Thresholds
16 digital (D0 to D15. Pod 1: D7 ~ D0, Pod 2: D15 ~ D8)
Threshold per pod
Threshold selections
User-defined threshold range
Maximum input voltage
Threshold accuracy 1
Maximum input dynamic range
Minimum voltage swing
Input impedance
TTL (+1.4 V), 5 V CMOS (+2.5 V), ECL (–1.3 V), user-defined (selectable by pod)
± 8.0 V in 10 mV steps
± 40 V peak CAT I
± (100 mV + 3% of threshold setting)
± 10 V about threshold
500 mVpp
100 kΩ ± 2% at probe tip
~8 pF
Input capacitance
Vertical resolution
1 bit
1� Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 10 °C from firmware calibration
temperature.
2. 1 mV/div and 2 mV/div is a magnification of 4 mV/div setting. For vertical accuracy calculations, use full scale of 32 mV for 1 mV/div and 2 mV/div sensitivity
setting�
3� 1.5 GHz real time bandwidth in half-channel mode or full channel equivalent time mode.