32 | Keysight | InfiniiVision 6000 X-Series Oscilloscopes - Data Sheet
Performance Characteristics
DSOX/MSO 6000 X-Series digital storage/mixed signal oscilloscopes
6000 X-Series specification overview
Half channel bandwidth 1 (–3 dB)
1 GHz
1 GHz
N/A
≤ 350 ps
2
2.5 GHz
2.5 GHz
N/A
4 GHz
4 GHz
N/A
6 GHz
4 GHz
6 GHz
≤ 75 ps
Full channel bandwidth 1 (–3 dB)
Full channel equivalent time bandwidth 1 (–3 dB)
Calculated rise time (10 to 90%)
≤ 140 ps
≤ 112.5 ps
Input channels
DSOX6002A
DSOX6004A
MSOX6002A
MSOX6004A
4
2 + 16
4 + 16
Maximum sample rate
Maximum memory depth
Display size and type
Waveform update rate
20 GSa/s half channels, 10 GSa/s full channels
Standard 4 Mpts, Standard segment memory
12.1-inch capacitive multi-touch/gesture-enabled display
> 450,000 waveforms per second
Typical noise floor at 1 mV/div, 50 Ω
115 μVrms
150 μVrms
150 μVrms
210 μVrms
Vertical system analog channels
Hardware bandwidth
limits
Input coupling
1 MΩ
50 Ω
20 MHz, 200 MHz (selectable per channel)
20 MHz, 200 MHz, 1.5 GHz, 3 GHz (selectable per channel)
AC, DC
Input impedance
Input sensitivity range
Selectable: 1 MΩ ± 1% (14 pF), 50 Ω ± 3%
1 mV/div to 5 V/div 2 (200 MHz bandwidth limit at ≤ 2 mV/div)
1 mV/div to 1 V/div 2
1 MΩ
50 Ω
Vertical resolution
Maximum input voltage 1 MΩ
8 bits (measurement resolution is 12 bits with averaging)
300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk
Frequency derating (assumes sine wave input): 400 Vpk until 40 kHz
Then derates at 20 db/dec until 6 Vpk
50 Ω
50 Ω: ± 5Vpk max
± 3 div: 1.5% of full scale (typical)
± 4 div: 2.5% of full scale (warranted) 2
DC vertical gain accuracy 1
DC vertical offset accuracy
Channel-to-channel isolation
± 0.1 div ± 2 mV ± 1% of offset setting (valid for an offset of ≤ ± 12 divisions)
≥ 100:1 (DC to 1 GHz), ≥ 30:1 (> 1 GHz)
Offset range
1 MΩ
50 Ω
± 5 V (1 to < 10 mV/div), ± 20 V (10 to ≤ 200 mV/div), ± 100 V (> 200 mV/div)
± 12 div or ± 0.8 V, whichever is smallest (≤ 100 mV/div)
± 12 div or ± 4 V, whichever is smallest (> 100 mV/div)
Dynamic range
1 MΩ
50 Ω
± 8 divisions from center screen (≤ 100 mV/div), 2nd harmonic distortion of - 40 dbc
± 4 divisions from center screen (> 101 mV/div), 2nd harmonic distortion of - 23 dbc
(For a 10:1 probe on the 1 MΩ input, vertical scaling is multiplied by 10)
± 8 divisions from center screen
Noise floor at 50 Ω
1 GHz
2.5 GHz
4 GHz
6 GHz
1 mV/div
10 mV/div
100 mV/div
1 V/div
115 µVrms
330 µVrms
3.15 mVrms
31.5 mVrms
± 2 kV (on input BNCs)
150 µVrms
355 µVrms
3.25 mVrms
32.5 mVrms
150 µVrms
350 µVrms
3.20 mVrms
32 mVrms
210 µVrms
395 µVrms
3.35 mVrms
33.5 mVrms
ESD tolerance
1. Denotes warranted specifications; All others are typical. Specifications are valid after a 30-minute warm-up period and ± 10 °C from firmware calibration
temperature.
2. 1 mV/div is a magnification of 2 mV/div setting. For vertical accuracy calculations, use full scale of 16 mV for 1 mV/div sensitivity setting.
KEYSIGHT [ Keysight Technologies ]
