14 | Keysight | 89601B/BN-200 Basic Vector Signal Analysis, 89601B/BN-300 Hardware Connectivity, 89600 VSA Software - Technical Overview
Key Specifications
This technical overview provides nominal performance specifications for the software when making measurements with the specified
platform.1 Nominal values indicate expected performance, or describe product performance that is useful in the application of the
product, but is not covered by the product warranty. For a complete list of specifications refer to the measurement platform literature.
Basic VSA (Option 200)
X-Series signal analyzers
PXA
MXA
EXA
CXA
General performance
UXA
The specifications in this table represent a summary of the performance of the instruments indicated and apply for cases where the 89600 VSA software
is installed inside the instrument as well as when it is used with an external PC controller connected via LAN.
See the I/Q Analyzer section of the respective X-Series signal analyzer data sheets for more information
Literature number
Frequency
5992-0090EN
5990-3952EN
5989-4942EN
5989-6529EN
5990-4327EN
Minimum frequency
9 kHz
(Option 503/507)
10 MHz
(Option 513/526)
AC coupled
10 MHz
3 Hz
10 MHz
3 Hz
10 MHz
10 MHz
10 Hz
9 kHz
(Option 513/526)
DC coupled
10 Hz
Maximum frequency
Option dependent
up to 26.5 GHz
10 uHz
up to 50 GHz
10 uHz
up to 26.5 GHz
up to 44 GHz
1 mHz
up to 26.5 GHz
up to 25 MHz
Center frequency tuning
Resolution
Frequency span
Option dependent
up to 510 MHz
up to 160 MHz
up to 160 MHz
up to 40 MHz
Frequency span Baseband IQ (Option BBA)
I+jQ BW 1 ch BW 2 ch BW I+jQ BW 1 ch BW 2 ch BW
20 MHz 10 MHz 10 MHz 20 MHz 10 MHz 10 MHz
50 MHz 25 MHz 20 MHz2 50 MHz 25 MHz 20 MHz2
80 MHz 40 MHz 20 MHz2 80 MHz 40 MHz 20 MHz2
Standard
Option B25
Option B40
Frequency points per span
Calibrated points
Displayed points
51 to 409,601
51 to 524,288
1. Data subject to change
2. Values are for baseband measurements; values increase to match 1 ch BW for zoom measurements. Select baseband/zoom in the 89600 VSA software by
clicking on MeasSetup>Frequency (tab)>Time Data> then either baseband or zoom.
KEYSIGHT [ Keysight Technologies ]
